Advanced Industrial LoRa/LoRaWAN WISE-4610 Wireless I/O Module Features Private LoRa and LoRaWAN selectable Longer communication range Better penetration through concrete and steel Less interference than 2.4GHz spectrum Application-ready I/O combination with IP65 enclosure Powered by solar rechargeable battery or 10~50V input DC GPS/Galileo/BeiDou/GLONASS support Introduction Common Specification LPWAN is a type of wireless telecommunication wide area network designed to allow Wireless Communication long range communications at a low data rate among IoT applications, such as sensors Standard LoRaWAN or Private LoRa operated on a battery. Its benefits is to offer multi-year battery lifetime for sensors/ applications to send small amounts of data over long distances a few times per hour Private LoRa Frequency Range & Region* EU 863-870 (MHz) suitable for different environments. US 902-928 (MHz) Private LoRa and LoRaWAN are one of category of LPWAN which belong to the non-cellular JP 915-928 (MHz) LPWAN wireless communication network protocols enables very long range transmissions LoRaWAN Frequency Range & Region* with low power consumption, operating in the non-licensed spectrum. EU 868 NA 915 JP 923 AS 923 * Other region can be supported upon request Spreading Factor 7~12 Outdoor Range 15Km (L.o.S) by pairing with WISE-6610 (with 2 dBi Star Topology Antenna) The LoRaWAN networks in a star topology have gateway relaying the data between the Transmit Power Up to +18dBm sensor nodes and the network server. Receiver Sensitivity Up to -136dBm at SF = 12 / 125KHz Communication between the sensor nodes and the gateway goes over the wireless channel Data Rate 50 kbps at FSK mode EU868 utilizing the LoRa physical layer, whilst the connection between the gateways and the 21.9 kbps at SF7 mode US915 central server are handled over a backbone IP-based network. 5.47 kbps at SF7 mode JP923 Topology Star The LoRaWAN end nodes(sensors) typically use Low Power and are battery powered Function End Node (Class A and Class C). LoRa embedded sensors that run on batteries that lasts from 25 Antenna Type External years typically. The LoRa sensors can transmit signals over distances from 1km 10km. GPS (Only Supported on WISE-4610P) GNSS Systems GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS signals Max. Update Rate Single GNSS: up to 18 Hz Concurrent GNSS: up to 10 Hz Accuracy Position: 2.5 m CEP (50% confidence) With SBAS: 2.0 m CEP (50% confidence) Acquisition Cold starts: 57 s Aided starts: 7 s Antenna Type Internal Wireless IoT Sensing Devices All product specifications are subject to change without notice. Last updated: 28-Aug-2020WISE-4610 RTD Types and Temperature Ranges General Pt 100 RTD Power Input WISE-4610P RTD 100 (a = 0.00385) -200C to 600C Built-in 4100mAh Lithium rechargeable battery RTD 100 (a = 0.00392) -200C to 600C pack Pt 1000 RTD 10~50V external power DC Pt -40C to 160C 17-21VDC Solar Panel Accuracy 0.1% FSR WISE-4610 CMR 50/60 Hz 90 dB 10~50VDC external power NMR 50/60 Hz 60 dB Battery Life 6 months (1 hour data update and 1 day GPS Span Drift 25 ppm/C update) Configuration Interface Micro-B USB LED Indicator Status, Error, Tx, Rx, Battery/Signal Level WISE-S617 (2AI/2DI/1DO/1RS-485) Mounting DIN 35 rail, wall, pole, and stack Dimension (W x H x D) 82 x 122 x 49 mm (without antenna) Digital Input Channel 2 Operating Temperature Logic Level (Dry Contact) 0: Open With rechargeable battery 0 ~ 60 C (32 ~ 140 F) 1: Close to DI COM Without battery -25 ~ 70 C (-13 ~ 158 F) Non-isolation Supports 32-bit counter input function Storage Temperature (maximum signal frequency: 200 Hz) With rechargeable battery -20 ~ 60 C (-4 ~ 140 F) Supports keep/discard counter value when power OFF Without battery -40 ~ 85 C (-40 ~ 185 F) Supports frequency input function (maximum signal frequency: 200 Hz) Operating Humidity 5 ~ 95% RH (non-condensing) Supports inverted digital input status Storage Humidity 0 ~ 95% RH (non-condensing) Analog Input WISE-S614 (4AI/4DI) Channels 2 Resolution 16 bit Sampling Rate 1 Hz per channel Analog Input Accuracy 0.1% of FSR (Voltage) Channels 4 0.2% of FSR (Current) Resolution 16-bit Input Range 1 V, 5V, 10V, 0 ~ 1V, 0 ~ 5V, 0 ~ 10V, 0 ~ 20mA, Sampling Rate 1Hz per channel 4 ~ 20mA, 20mA Accuracy 0.1% of FSR (Voltage) Input Impedance > 2M (Voltage) 0.2% of FSR (Current) 120 (External Resistor for Current) Input Range 150mV, 500mV, 1 V, 5V, 10V, 0 ~ 150mV, Isolation Voltage 2000 VRMS 0 ~ 500mV, 0 ~ 1V, 0 ~ 5V, 0 ~ 10V, 0 ~ 20mA, Common Mode Voltage 350 V DC 4 ~ 20mA , 20mA Drift Unipolar 100ppm Input Impedance > 2M (Voltage) Bipolar 50ppm 240 (External resistor for current) Burn-Out Detection Yes (4 ~ 20mA only) Isolation Voltage 2000 V DC Supports data scaling and averaging Common Mode Voltage 350 VDC Drift Unipolar 100ppm Digital Output Bipolar 50ppm Channel 1 (Sink Type) Burn-out Detection Yes (4~20mA only) Non-isolation Supports Data Scaling and Averaging Output Current 100mA Digital Input COM Port Channels 4 Port Type RS-485 Input Type Dry Contact (Wet Contact by request) Baud Rate (bps) 1200, 2400, 4800, 9600, 19200, 38400, 57600, Logic Level 0: Open 115200 1: Close to DI COM Data Bits 7, 8 Supports 200Hz Counter Input (32-bit + 1-bit overflow) Stop Bits 1, 2 Keep/Discard Counter Value when Power-off Parity None, Odd, Even Supports Inverted DI Status Flow Control Auto flow control Signals DATA+ and DATA- WISE-S615 (4 RTD) Protection 15 kV ESD Supported Protocols Modbus/RTU (Up to 32 addresses with a maximum of 8 instructions) Analog Input Channels 4 differential Input Connections 2, 3-wire Input Impedance 10 M Resolution 15 bits Sampling Rate 1 Sample/s (MAX) Online Download www.advantech.com/products