The S915M000S002 is a low-loss, compact, and economical surface-acoustic-wave (SAW) RF filter in a surface-mount ceramic DCC6C case for cordless telephone. It provides low insertion loss and high attenuation. 1. Package Dimension (DCC6C) Pin Configuration 2 Input / Output 5 Output / Input 1, 3, 4, 6 Case Ground Sign Data (unit: mm) Sign Data (unit: mm) A 0.6 E 1.1 B 1.5 F 3.0 C 1.5 G 3.0 D 1.8 2. Marking 3. Matching Circuit NDF9118 Laser Marking 4. Typical Frequency Response 5. Performance 5-1. Maximum Ratings Rating Value Unit Input Power Level P 15 dBm DC Voltage V 12 V DC Operable Temperature Range T -10 to +65 A Storage Temperature Range T -40 to +85 stg 5-2. Electronic Characteristics Characteristic Minimum Typical Maximum Unit Nominal Center Frequency f -- 915.000 -- MHz C Usable Pass Bandwidth BW -- 26 -- MHz Insertion Loss IL -- 2.3 3.0 dB 902.00 . 928.00 MHz Inband Ripple -- 0.8 1.2 dB 902.00 . 928.00 MHz Absolute Attenuation DC . 800.00 MHz 45 58 -- dB 800.00 . 865.00 MHz 40 48 -- dB dB 975.00 . 1020.0 MHz 30 40 -- 1020.0 . 2000.0 MHz 45 58 -- dB Input / Output Impedance (Nominal) 50 L CAUTION: Electrostatic Sensitive Device. Observe precautions for handling C AEL 2008. All Rights Reserved. 1. The frequency f is defined as the midpoint between the 3dB frequencies. C 2. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 test system with VSWR2.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, f . Note that insertion loss, bandwidth, and passband shape are dependent on C the impedance matching component values and quality. 3. Unless noted otherwise, specifications apply over the entire specified operating temperature range. 4. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 5. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 6. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 7. For questions on technology, prices and delivery please contact our sales offices.