Revision of August 2017 TF-FUSE Thin Film Surface Mount Fuses Product Identification: T 0603 FF 1000 T M (1) (2) (3) (4) (5) (6) (1) Product Code: T-Thin Film (2) Size Code: Standard EIA chip sizes (3) Series Code: FFVery Fast Acting, HIHigh Inrush (4) Current Rating Code: 05000.5A, 10001.0A (5) Package Code: TTape & Reel BBulk (6) Marking Code: MWith mark (optional) Environmental Tests: No. Test item Requirement Test condition Reference 1A: 10% DCR change max. 1 Bending 2mm Refer to AEM QIQ034 >1A: 20% DCR change max. MIL-STD-202 2 Solderability 95% coverage min. One dip at 255 for 5 seconds Method 208 DCR change within 10% MIL-STD-202 3 Thermal shock 100 cycles between -55C and +125C No mechanical damage Method 107 Moisture DCR change within 10% MIL-STD-202 4 10 cycles resistance No excessive corrosion Method 106 MIL-STD-202 DCR change within 10% 5 Salt spray 5% salt solution, 48 hour exposure Method 101 No excessive corrosion Mechanical DCR change within 10% MIL-STD-202 6 0.4 D.A. or 30G between 5 and 3000 Hz vibration Method 204 No mechanical damage MIL-STD-202 DCR change within 10% 7 Mechanical shock 1500G, 0.5 ms, half sine shocks Method 213 No mechanical damage Change of voltage drop 75% rated current, 2000 hours, ambient 8 Life Refer to AEM QIQ106 within 10%, no open circuit temperature +20C to 30C Thermal Shock When Making Correction with a Soldering Iron: The temperature of solder iron tip should be controlled under 350 C and soldering time should be less than 3 sec. The soldering iron tip should not directly touch the top side termination of the component. Fig 3 Correct handling method of soldering iron Website: www.aemchina.com & www.aemcomponents.com Revision of August 2017 TF-FUSE Thin Film Surface Mount Fuses Temperature Effect on Current Rating: Recommended Reflow Soldering Profile: Pb-Free Profile Feature Assembly Preheat/Soak Temperature Min (T ) 150C smin Temperature Max(T ) 200C smax Time(t ) from (T to T ) 60~120 seconds s smin smax Ramp-uprate (T to T ) 3C/second max. L p Liquidous temperature(T ) 217C L Time(t ) maintained above T 60~150 seconds L L Peak package body temperature (T ) 260C p Time (t )*within 5C of the specified p 30 seconds * classification temperature (T ) c Ramp-down rate (T to T ) 6C/second max. p L Time 25C to peak temperature 8 minutes max. * Tolerance for peak profile temperature (T ) is defined as a p supplier minimum and a user maximum Packaging: Chip Size Parts on 7 inch (178mm) Reel 0603(1608) 8,000 Disclaimer: Specifications are subject to change without notice. AEM products are designed for specific applications and should not be used for any purpose (including, without limitation, automotive, aerospace, medical, life-saving applications, or any other application which requires especially high reliability for the prevention of such defect as may directly cause damage to the third partys life, body or property) not expressly set forth in applicable AEM product documentation. It is the customers responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Warranties granted by AEM shall be deemed void for products used for any purpose not expressly set forth in applicable AEM product documentation. AEM shall not be liable for any claims or damages arising out of products used in applications not expressly intended by AEM as set forth in applicable AEM product documentation. The sale and use of AEM products is subject to AEM terms and conditions of sale. Please refer to AEMs website for updated catalog and terms and conditions of sale. Website: www.aemchina.com & www.aemcomponents.com