13563 AIM

RMA CORED WIRE FEATURES Rosin Mildly Activated Promotes Thermal Transfer ROL0 per J-STD-004B Glycol-Free Fast Wetting Properties DESCRIPTION RMA cored wire is a mildly activated, general-purpose wire solder for use in electronics soldering applications. RMA cored wire provides excellent tarnish and oxide removal producing shiny solder joints. RMA cored wire complies with MIL-F-14256 and QQ-S-571 HANDLING & STORAGE specifications. RMA cored wire produces slight to moderate post- Time Temperature process residues that may be left on the substrate or removed with 7 Years < 85F (< 29C) commercially available flux removers. Store cored wire in a clean, dry area away from moisture and sunlight. Do not freeze this product. STANDARD AVAILABILITY CLEANING RMA cored wire is available in common alloys, diameters and spool Post-process residues can remain in place or be removed with sizes. Other alloys, diameters and spool sizes may be available upon commercially available flux removers. IPA is not special request. recommended. Contact AIM for more detailed cleaning information. APPLICATION Solder iron tip temperature should be between 350 - 400C (650 - SAFETY 750F) for Sn63, Sn62 and Sn60 alloys, 370 - 425C (700 - 800F) for SN100C, Sn/Ag and Sn/Ag/Cu (SAC305, SAC405, CASTIN, Use with adequate ventilation and proper personal protective equipment. Refer to the accompanying Safety Data Sheet for etc.) alloys. any specific emergency information. Do not dispose of any hazardous materials in non-approved containers. Document Rev NF3 Page 1 of 3 TEST DATA SUMMARY Name Test Method Results IPC Flux J-STD-004 ROL0 Classification IPC Flux J-STD-004B 3.3.1 ROL0 Classification Name Test Method Results Image J-STD-004B 3.4.1.1 Copper Mirror LOW IPC-TM-650 2.3.32 Before After J-STD-004B 3.4.1.2 Corrosion PASS IPC-TM-650 2.6.15 J-STD-004B 3.4.1.3 Quantitative Halides IPC-TM-650 0.0% 2.3.28.1 Qualitative Halides, J-STD-004B 3.5.1.1 PASS Silver Chromate IPC-TM-650 2.3.33 J-STD-004B 3.5.1.2 Qualitative Halides, IPC-TM-650 No Fluoride Fluoride Spot 2.3.35.1 13 12 11 10 J-STD-004 3.4.1.4 PASS 9 IPC-TM-650 2.6.3.3 8 7 6 Surface Insulation 5 4 Resistance 3 0 1 2 3 4 5 6 7 Time, day RMA 2% Sn96/Ag4 1A RMA 2% Sn96/Ag4 1B RMA 2% Sn96/Ag4 1C J-STD-004B 3.4.1.4 RMA 2% Sn96/Ag4 1D RMA 2% Sn96/Ag4 2A RMA 2% Sn96/Ag4 2B PASS IPC-TM-650 2.6.3.7 RMA 2% Sn96/Ag4 2C RMA 2% Sn96/Ag4 2D RMA 2% Sn96/Ag4 3A RMA 2% Sn96/Ag4 3B RMA 2% Sn96/Ag4 3C RMA 2% Sn96/Ag4 3D control 1A control 1B control 1C control 1D control 2A control 2B control 2C control 2D 159 2 Acid Value J-STD-004B 3.4.2.2 mgKOH/g Determination IPC-TM-650 2.3.13 flux Typical Document Rev NF3 Page 2 of 3 Log SIR (Ohm)