20393 AIM

Common Flux Thinner Thinner Description: Common Flux Thinner is a solvent that is used to thin Water Soluble, No Clean and RMA fluxes in foaming and some spray applications. Common Flux Thinner is typically used in conjunction with the AIM n.020 Titration Kit. Use of Common Flux Thinner is suggested when the flux acid number is too high due to solvent evaporation or residues increase due to evaporation. Follow the instructions outlined in the AIM n.020 Titration Kit procedure when diluting flux products. Process Control: - Monitor titration at frequent intervals. At least every four hours is recommended. - If titration requires the addition of Common Flux Thinner, measure desired quantity and add directly to flux pot. Physical Properties: Parameter Value Parameter Value Flash Point < 12C Visual Clear, Colorless Odor Slight Alcohol Odor Boiling Point 82C Specific Gravity 0.79 (water = 1) pH N/A Handling: - Common Flux Thinner has an unopened shelf life of 2 years when stored at room temperature. - Do not store Common Flux Thinner in direct sunlight. - Do not freeze this product. - Re-seal any opened containers while not in use. - Common Flux Thinner is shipped ready to use, no mixing necessary. Safety: - Use with adequate ventilation and proper personal protective equipment. - Refer to the accompanying Material Safety Data Sheet for any specific emergency information. - Do not dispose of any hazardous materials in non-approved containers. Manufacturing and Distribution Worldwide Americas +1-401-463-5605 Europe +44-1737-222-258 Asia-Pacific +86-755-2993-6487 info aimsolder.com www.aimsolder.com AIM IS ISO9001:2008 & ISO14001:2004 CERTIFIED The information contained herein is based on data considered accurate and is offered at no charge. Product information is based upon the assumption of proper handling and operating conditions. All information pertaining to solder paste is produced with 45-micron powder. Liability is expressly disclaimed for any loss or injury arising out of the use of this information or the use of any materials designated. Please refer to X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Soldering Flux category: Click to view products by AIM manufacturer: Other Similar products are found below : 8351-1L 8351-125ML 8342-50G ART.AGT-088 270WR ART.AGT-089 ART.AGT-094 ART.AGT-179 CW8100 CW8400 SSS500ML 63-0000-0186 63-0000-0951 63-0000-0977 63-0000-1544 83-1000-0186 83-1000-0951 83-1097-2331 8341-10ML 835-100ML SF-01 SF- 02 CW8700 FL22W SMD291SNL50T3 SMD291AX50T3 CQ2LF CQ4LF CQ4LF-0.5 CQ4LF-1.0 SMD291 SMD291150G SMD29175G SMD291AX SMD291AX10 SMD291AX250T3 SMD291NL SMD291ST2CC6 SMD291ST8CC SMD4300TF CW8100 CW8200 CW8500 FL33B 837-P 2506-N 2507-N