21060 AIM

200AX Stencil Cleaner Features: - Extends Paste Life - May be Used to Clean Solder Paste or Epoxy/Adhesive Residues - Increases Wipe Cycle Times - 100% Compatible with AIM Paste Formulations - Enhances Paste Release - Eliminates Double Wiping - Reduces Paste Dry-Out Description: 200AX is a glycol ether based stencil cleaner with a concentrated additive that is 100% compatible with all AIM solder pastes and epoxies. 200AX is formulated for application by hand. Where automatic application is desired, the use of AIMs DJAW Stencil Cleaner is recommended. Unlike other stencil cleaners, the AIM stencil cleaners help to reduce solder paste dry-out while enhancing its release from even the finest apertures, allowing for a greater number of print cycles between cleaning. For the cleaning of epoxy residues, 200AX will not dissolve the epoxy. In addition, 200AX will not degrade cured epoxy. WARNING: THIS PRODUCT IS DEVELOPED FOR USE BY HAND APPLICATION ONLY AND IS NOT INTENDED FOR AUTOMATED DISPENSE SYSTEMS. CHANGING OF EQUIPMENT PUMP SEALS AND CIRCULATION HOSES MAY BE REQUIRED TO USE IN AUTOMATED DISPENSE EQUIPMENT. CONTACT AIM TECHNICAL SUPPORT FOR MORE INFORMATION. Physical Properties: ITEM SPECIFICATION Appearance & Odor Clear Liquid, Butyl Odor Specific Gravity .9536 Boiling Point 230.6 C (447.08 F) Flash Point 77.7 C (171.86 F) Auto Ignition 227.7 C (441.86 F) Application: - 200AX is shipped ready to use. No mixing or thinning is required. - Spray 200AX in small amounts on a lint-free cloth or rag and wipe the areas of paste or epoxy residue to be cleaned. It is not recommended that 200AX be applied directly to the stencil. Wipe clean any excess 200AX from the stencil before proceeding. - PCBs and components can safely be immersed or cleaned with 200AX. Packaging: 200AX is available in 1, 5 and 55 gallon containers. Handling: - 200AX has a sealed shelf life of 2 years. - Do not freeze this product. - Do not store near fire or flame. - Keep away from sunlight as it may degrade product. - Do not mix used and unused chemical in the same container. - Reseal any opened containers. Safety: - Use with adequate ventilation and proper personal protective equipment. - Refer to the accompanying Material Safety Data Sheet for any specific emergency information. - Do not dispose of any hazardous materials in non-approved containers. Manufacturing and Distribution Worldwide Americas +1-401-463-5605 Europe +44-1737-222-258 Asia-Pacific +86-755-2993-6487 info aimsolder.com www.aimsolder.com AIM IS ISO9001:2008 & ISO14001:2004 CERTIFIED The information contained herein is based on data considered accurate and is offered at no charge. Product information is based upon the assumption of proper handling and operating conditions. All information pertaining to solder paste is produced with 45-micron powder. Liability is expressly disclaimed for any loss or injury arising out of the use of this information or the use of any materials designated. Please refer to