SAFETY DATA SHEET ISSUED SEPTEMBER 2014 (VALID 5 YEARS FROM DATE OF ISSUE) Flux 264-5 SECTION 1 - IDENTIFICATION OF THE MATERIAL & COMPANY INFORMATION Chemtools Pty Ltd Phone: 1300 738 250 (business hours) Unit 2/14-16 Lee Holm Road Fax: 02 9623 3670 St Marys NSW 2760 www.chemtools.com.au PRODUCT NAME Flux 264-5 PRODUCT TYPE Solder Flux PART NUMBER 264-5 AVAILABLE SIZES 1L, 5L, 20L 55ml & 250ml SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Chemical Name CAS Number Proportion % w/w Isopropyl alcohol 2-propanol 67-63-0 60 - 100 Petroleum distillates Naphtha, heavy alkylate 64741-65-7 1 - 5 SECTION 3 - HAZARDS IDENTIFICATION General hazard statement Classified as hazardous according to the criteria of NOHSC. Hazard classification Harmful. Carc. Cat. 2. Hazardous Substance. Dangerous Goods. Risk phrase(s) R11 Highly flammable R18 In use, may form flammable/explosive vapour-air mixture R65 Harmful: May cause lung damage if swallowed. Safety phrase(s) S53 Avoid exposure obtain special instructions before use S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible) Routes of entry Absorbed through skin. Eye contact. Inhalation. Ingestion. Skin contact. Potential acute health effects Fumes and/or dusts produced by this product may be hazardous in case of inhalation. This product may be hazardous in case of skin contact (irritant, sensitiser, permeator), of eye contact (irritant), of ingestion. Potential chronic health effects SECTION 4 - FIRST AID MEASURES Description of necessary measures according to routes of exposure Material Safety Data Sheet: Flux 264-5 Page 2 Eye contact Check for and remove any contact lenses. IMMEDIATELY flush eyes with running water for at least 15 minutes, keeping eyelids open. COLD water may be used. DO NOT use an eye ointment. Seek medical attention. Skin contact After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. COLD water may be used. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Was contaminated clothing before reusing. Hazardous skin contact Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek immediate medical attention. Inhalation Allow the victim to rest in a well-ventilated area. Seek immediate medical attention. Hazardous inhalation Evacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or waistband. If breathing is difficult, administer oxygen. If the victim is not breathing, perform mouth-to- mouth resuscitation. WARNING: It may be hazardous to the person providing aid to give mouth-to-mouth resuscitation when the inhaled material is toxic, infectious or corrosive. Seek immediate medical attention. Ingestion DO NOT induce vomiting. Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the toxic material was ingested the absence of such signs, however, is not conclusive. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention. Hazardous ingestion No additional information Indication of medical attention and special treatment needed including description of most important symptoms, acute and delayed Aggravated medical conditions None known. caused by exposure SECTION 5 - FIRE FIGHTING MEASURES Suitable extinguishing media Small fire: Use DRY chemical powder. Large fire: Use alcohol foam, water spray or fog. Flammable liquid, soluble or dispersed in water. Hazards from combustion Products are carbon oxides carbon monoxide and carbon dioxide. products Special protective precautions Special equipment for fire fighters Hazchem Code 2 Y E SECTION 6 - ACCIDENTAL RELEASE MEASURES