Conforms to EU Directive 91/155/EEC, as amended by 2001/58/EC SAFETY DATA SHEET Sn-Pb NC254 1. Identification of the substance/preparation and of the company/undertaking Identification of the substance or preparation Product name : Sn-Pb NC254 Product type : Paste. Synonyms : For all alloys (Sn-Pb) NC 254 Use of the : Soldering substance/preparation Company/undertaking identification Contacts : AIM 9100 Henri Bourassa East Montreal, QC H1E 2S4 (514) 494-2000 INFOTRAC North America: (800) 535-5053 International: (352) 323-3500 2. Composition/information on ingredients Preparation Substance/preparation : Ingredient name CAS % EC number Classification number Europe TIN 7440-31-5 Variable 231-141-8 LEAD 7439-92-1 Variable 231-100-4 rosin 8050-09-7 1.5 - 5 232-475-7 See section 16 for the full text of the R-phrases declared above Occupational exposure limits, if available, are listed in section 8. 3. Hazards identification The preparation is classified as dangerous according to Directive 1999/45/EC and its amendments. Xi R36/38 Classification : R42/43 Human health hazards : Irritating to eyes and skin. May cause sensitization by inhalation and skin contact. See section 11 for more detailed information on health effects and symptoms. 4. First aid measures First aid measures Get medical attention immediately. Move exposed person to fresh air. If it is Inhalation : suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. In the event of any complaints or symptoms, avoid further exposure. Date of issue : 10/1/2008. Page: 1/7Sn-Pb NC254 4. First aid measures Ingestion : Wash out mouth with water. Remove dentures if any. Move exposed person to fresh air. Keep person warm and at rest. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention if symptoms occur. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. Skin contact : Flush contaminated skin with plenty of water. Continue to rinse for at least 10 minutes. Get medical attention. In the event of any complaints or symptoms, avoid further exposure. Remove contaminated clothing and shoes. Wash contaminated clothing thoroughly with water before removing or wear gloves. Wash clothing before reuse. Clean shoes thoroughly before reuse. Eye contact : Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention. No action shall be taken involving any personal risk or without suitable training. If it is Protection of first-aiders : suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. See section 11 for more detailed information on health effects and symptoms. 5. Fire-fighting measures Extinguishing media Use an extinguishing agent suitable for the surrounding fire. Suitable : Not suitable : None known. Special exposure hazards : No specific hazard. Hazardous thermal : These products are carbon oxides (CO, CO2), nitrogen oxides (NO, NO2...). Some metallic oxides. decomposition products Fire-fighters should wear appropriate protective equipment and self-contained Special protective : breathing apparatus (SCBA) with a full face-piece operated in positive pressure equipment for fire-fighters mode. Remark : Vapors and air form an explosive mixture. 6. Accidental release measures Personal precautions : Immediately contact emergency personnel. Keep unnecessary personnel away. Use suitable protective equipment. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains Environmental precautions : and sewers. Methods for cleaning up : If emergency personnel are unavailable, vacuum or carefully scoop up spilled material and place in an appropriate container for disposal by incineration. Avoid creating dusty conditions and prevent wind dispersal. 7. Handling and storage Avoid contact with eyes, skin and clothing. Keep container closed. Use only with Handling : adequate ventilation. Do not breathe dust. Wash thoroughly after handling. Keep container tightly closed. Keep container in a cool, well-ventilated area. Storage : Packaging materials Recommended : Use original container. 8. Exposure controls/personal protection Ingredient name Occupational exposure limits Europe Date of issue : 10/1/2008. Page: 2/7