AM100EBO-NZ DC-DC Converter Preliminary Click to ORDER AM100EBO-NZ samples The AM100EBO-NZ series is a high-performance 1/8 brick DC/DC converter specifically designed for a variety of telecom applications. It features 100W of output power with no requirement for minimum load, a wide input voltage of 36- 75VDC, operating temperature up to 100 and tested I/O isolation of 1500VDC. Additionally, this series includes input under-voltage protection, output over- voltage, short-circuit, over-current and over-temperature protection, remote On/Off control, remote sense compensation and output voltage trim adjustment. The AM100EBO-NZ meets IEC/EN/UL 62368 standards and can be widely used in the industrial control, electric power instrumentation and communication sectors. 1/8 brick package Features Summary High I/O Isolation 1500VDC AM100EBO-NZ Input under voltage protection, over 1500 48 6000 100 temperature protection, output over voltage, over current and short circuit protection 125 125 28 Operating Temp: -40 C to +100 C 100 Low profile height: 9.69mm 75 Compact 1/8 brick footprint and high-power 1500 36 Density 33 5 1000 3.3 Efficiency up to 93% 3 0.25 -40 -40 Input voltage Output voltage Isolation Power Temp. range Derating (VDC) (V) (VDC) (W) (C) (C) Applications Training Press Release Coming Soon Industrial Telecom Portable Equipment IoT Application Notes Product Training Video (click to open) F 052e R4 www.Aimtec.com 1 AM100EBO-NZ DC-DC Converter Preliminary Models & Specifications Single Output Maximum Input Voltage Output Voltage Maximum Output Efficiency Model capacitive (VDC) (VDC) Current (A) Typ. (%) Load (F) AM100EBO-4805SNZ 48 (36-75) 5 20 6000 92 AM100EBO-4812SNZ 48 (36-75) 12 8.3 2000 93 AM100EBO-4815SNZ 48 (36-75) 15 6.67 2000 93 AM100EBO-4824SNZ 48 (36-75) 24 4.17 1000 92 AM100EBO-4828SNZ 48 (36-75) 28 3.57 1000 92 Input Specification Parameters Conditions Typical Maximum Units Input current Nominal input voltage, full load /no load 2264/20 2315/30 mA Filter Pi filter Absolute maximum rating Maximum duration 1s >0.7 80 VDC Input reflected ripple current 30 100 mA Start-up voltage 36 VDC Start-up current 5 A UVLO 29 VDC On Control pin open or 3.5-12VDC On/Off control Off Control pin short to Vin or 0-1.2VDC Idle current 3 10 mA Isolation Specification Parameters Conditions Typical Maximum Units Tested I/O voltage 60 sec, leakage 1mA >1500 VDC Resistance 500VDC >1000 M Capacitance 100kHz/0.1V 1000 pF Output Specification Parameters Conditions Typical Maximum Units Voltage accuracy 0-100% load 1 3 % Line regulation LL-HL 0.2 0.5 % Load regulation 5-100% load 0.5 0.75 % Temperature coefficient 0.03 %/C Nominal input voltage, 5-100% load 100 150 mV pk-pk Ripple & Noise* Nominal input voltage, 0-5% load 5 % of Vout Transient Recovery Time 25% load step change 300 500 s 25% load step change, 5V output 5 8 % Transient Response Deviation 25% load step change, others 3 5 % Trim 10 % Sense compensation 5 % Start-up time Nominal input voltage, constant resistance load 100 ms * Ripple and Noise are measured at 20MHz bandwidth. Please refer to the application note for specific details. F 052e R4 www.Aimtec.com 2