Click on Series name for product info on aimtec.com Series AM10EW-Z 10 Watt DC-DC Converter FEATURES: RoHS compliant Low ripple and noise Efficiency up to 85% Remote on/off control Input/Output Isolation 1500VDC Wide 4:1 input range o o Operating temperature -40 C to + 85 C Continuous Short Circuit Protection Models Single output Input Voltage Output Voltage Output Current Capacitive load Efficiency Model (V) (V) max (A) max ( F) (%) AM10EW-2403SZ 9-36 3.3 2 3300 79 AM10EW-2405SZ 9-36 5 2 3300 82 AM10EW-2412SZ 9-36 12 0.83 680 85 AM10EW-2415SZ 9-36 15 0.67 470 85 AM10EW-4803SZ 18-72 3.3 2 3300 79 AM10EW-4805SZ 18-72 5 2 3300 82 AM10EW-4812SZ 18-72 12 0.83 680 85 AM10EW-4815SZ 18-72 15 0.67 470 85 Models Dual output Input Voltage Output Voltage Output Current Capacitive load Efficiency Model (V) (V) max (A) ( F) (%) AM10EW-2405DZ 9-36 5 1 2200 82 AM10EW-2412DZ 9-36 12 0.416 470 85 AM10EW-2415DZ 9-36 15 0.333 330 85 AM10EW-4805DZ 18-72 5 1 2200 82 AM10EW-4812DZ 18-72 12 0.416 470 85 AM10EW-4815DZ 18-72 15 0.333 330 85 Input Specifications Parameters Nominal Typical Maximum Units 24 9-36 Voltage range VDC 48 18-72 Filter (Pi) Network ON 2.5~5.5 or open circuit Remote ON/OFF Control VDC OFF -0.7~ 0.8 or short circuit b/n pin 2 & 1 Turn on Transient process time 350 ms Start up time 20 ms 24 Vin -0.7-40 Absolute Maximum Rating VDC 48 Vin -0.7-80 Peak Input Voltage time 100 ms Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 3 sec 1500 VDC Case/ Input & Output 1000 VDC Resistance > 1000 MOhm Capacitance 1200 pF www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.D 1 of 3 North America only Series AM10EW-Z 10 Watt DC-DC Converter Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 1 % Voltage balance (Dual output) Balance Load 1 % Short Circuit protection Continuous Short Circuit restart Auto Recovery Current limiting 140 % of Iout max Line voltage regulation HL-LL 0.5 % Load voltage regulation 10-100% load 0.5 % Load voltage regulation 10% load 1.0 % o Temperature coefficient 0.02 %/ C Ripple & Noise 20Mhz bandwidth 75 mV p-p Rising time 10 ms General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 300 KHz o Operating temperature -40 to +85 C o Storage temperature -40 to +125 C o Max case temperature 100 C Cooling Free air convection Humidity 95 % Case material Nickel coated copper Weight 30 g Dimensions (L x W x H) Tolerance 0.5mm 2.00 x 1.00 x 0.40 inches 50.80 x 25.00 x 10.16 mm o MTBF >1 121 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Agency Approvals CE, meets IEC 60950 1:2001 EN55022 Class A, EN55024 IEC61000-4-2, Perf. Criteria B IEC61000-4-3, Perf. Criteria A Standards IEC61000-4-4, Perf. Criteria B IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A Pin Out Specifications Pin Single Dual 1 On/Off Control On/Off Control 2 -V Input -V Input 3 +V Input +V Input 4 -V Output -V Output 5 No Pin Common 6 +V Output +V Output www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.D 2 of 3 North America only