AM10SBO-NZ DC-DC Converter Preliminary Click to ORDER AM10SBO-NZ samples The AM10SBO-NZ series is a high-performance open frame 1/16 brick DC/DC converter specifically designed for a variety of telecom applications. It features 10W of output power with no requirement for minimum load, a wide input voltage range of 36-75VDC, operating temperature up to 85C and tested I/O isolation of 1500VDC. Additionally, this series includes input under-voltage protection, output short-circuit, over-voltage, over-current protection, and remote On/Off control. The AM10SBO-NZ meets EN 62368 standards and are widely used in the industrial control, electric power instrumentation and communication. Open frame 1/16 brick Features Summary High I/O Isolation 1500VDC AM10SBO-NZ Input under voltage protection, output over 1500 48 6000 100 current, over voltage, and short circuit protection 125 125 Operating Temp: -40 C to +85 C 85 24 71 Compact open frame design and high-power 75 density 1500 36 10 Efficiency up to 88% 5 1000 3.3 3 0.25 -40 -40 Input voltage Output voltage Isolation Power Temp. range Derating (VDC) (V) (VDC) (W) (C) (C) Applications Training Press Release Coming Soon IoT Industrial Telecom Portable Equipment Application Notes Product Training Video (click to open) F 052e R4 www.Aimtec.com 1 AM10SBO-NZ DC-DC Converter Preliminary Models & Specifications Single Output Maximum Input Voltage Output Voltage Maximum Output Efficiency Model capacitive (VDC) (VDC) Current (A) Typ. (%) Load (F) AM10SBO-4805SNZ 48 (36-75) 5 2 2200 83 AM10SBO-4812SNZ 48 (36-75) 12 0.833 470 87 AM10SBO-4815SNZ 48 (36-75) 15 0.667 330 88 AM10SBO-4824SNZ 48 (36-75) 24 0.417 100 88 Input Specification Parameters Conditions Typical Maximum Units Input current Nominal input voltage, full load /no load 252/4 258/8 mA Filter Capacitor filter Absolute maximum rating Maximum duration 1s >0.7 100 VDC Input reflected ripple current 50 mA Start-up voltage 36 VDC Start-up time 100 ms UVLO 29 VDC On Control pin open or 3.5-12VDC On/Off control Off Control pin short to Vin or 0-1.2VDC Idle current 6 10 mA Isolation Specification Parameters Conditions Typical Maximum Units Tested I/O voltage 60 sec, leakage 1mA >1500 VDC Resistance 500VDC >1000 M Capacitance 100kHz/0.1V 1000 pF Output Specification Parameters Conditions Typical Maximum Units Voltage accuracy 5-100% load 1 3 % Line regulation LL-HL 0.2 0.5 % 5-100% load 0.5 1 % Load regulation 0-100% load 3 % Temperature coefficient 0.03 %/C Nominal input voltage, 5-100% load 100 120 mV pk-pk Ripple & Noise* Nominal input voltage, 0-5% load 5 % of Vo Transient Recovery Time 25% load step change 300 500 s 25% load step change, 5V output 5 8 % Transient Response Deviation 25% load step change, others 3 5 % * Ripple and Noise are measured at 20MHz bandwidth. Please refer to the application note for specific details. F 052e R4 www.Aimtec.com 2