Click on Series name for product info on aimtec.com
Series AM15CW-Z
15Watt | DC-DC Converter
FEATURES:
Ultra-compact footprint 1x1 Adjustable Output Voltage
Ultra-wide Input Range 4:1 Operating Temperature -40C to +85C
1600 VDC Isolation Over Current and Over Voltage Protection
Remote ON/OFF Function Efficiency up to 89%
No Minimum Load Required RoHS Compliant
Models
Single output
Output Max
Input Voltage Output Current Isolation Efficiency
Model Voltage Capacitive
(V) max (A) (VDC) (%)
(V) Load (uF)
AM15CW-2403SZ 9-36 3.3 4 1600 1000 86
AM15CW-2405SZ 9-36 5 3 1600 1000 87
AM15CW-2412SZ 9-36 12 1.3 1600 330 88
AM15CW-2415SZ 9-36 15 1 1600 220 89
AM15CW-4803SZ 18-75 3.3 4 1600 1000 84
AM15CW-4805SZ 18-75 5 3 1600 1000 86
AM15CW-4812SZ 18-75 12 1.3 1600 330 87
AM15CW-4815SZ 18-75 15 1 1600 220 88
Models
Dual output
Output Max
Input Voltage Output Current Isolation Efficiency
Model Voltage Capacitive
(V) max (A) (VDC) (%)
(V) Load (uF)
AM15CW-2405DZ 9-36 5 1.5 1600 470 85
AM15CW-2412DZ 9-36 12 0.625 1600 220 88
AM15CW-2415DZ 9-36 15 0.5 1600 100 89
AM15CW-4805DZ 18-75 5 1.5 1600 470 84
AM15CW-4812DZ 18-75 12 0.625 1600 220 87
AM15CW-4815DZ 18-75 15 0.5 1600 100 88
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Input Specifications
Parameters Nominal Typical Maximum Units
24 9-36
Voltage range VDC
48 18-75
Filter
Start up time Nominal Vin with constant resistive 20 ms
load
24 Vin 50
Absolute Maximum Rating VDC
48 Vin 100
Peak Input Voltage time 100 ms
On/Off control ON 3 to 12VDC (or open) ; OFF 0 to 1.2VDC or short pin 2 to pin 3; OFF idle current 5mA
No load current 15 mA
Input reflected ripple current 20 mA p-p
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832)
F 051e R11.H 1 of 4 North America only
REV: 09/19/A Series AM15CW-Z
15Watt | DC-DC Converter
Isolation Specifications
Parameters Conditions Typical Rated Units
Tested I/O voltage 3 sec 1600 VDC
Case to Input 3 sec 1600 VDC
Case to Output 3 sec 1600 VDC
Resistance >1000 MOhm
Capacitance 1200 pF
Output Specifications
Parameters Conditions Typical Maximum Units
Voltage accuracy 1 %
25% load on one output - 100% load
Cross Regulation (Dual Output Models) 5 %
on second load
Over voltage protection Zener Diode Clamp 120 %
Over current protection Full Load 170 %
Short Circuit protection Continuous
Short circuit restart Auto-Recovery
Line voltage regulation (Single) HL-LL 0.2 %
Line voltage regulation (Dual) HL-LL, balanced load 0.5 %
Load voltage regulation (Single) 0% to 100% load 0.5 %
Load voltage regulation (Dual) 0% to 100% balanced load 1 %
o
Temperature coefficient 0.02 %/ C
Ripple & Noise 20MHz Bandwidth 100 mV p-p
Voltage adjustment range Trim - Single output models only 10 %
General Specifications
Parameters Conditions Typical Maximum Units
Switching frequency 100% load 375 KHz
o
Operating temperature With derating above +66C -40 to +85 C
o
Storage temperature -40 to +125 C
o
Maximum case temperature 100 C
o
Derating 2.6 %/ C
Cooling Free air convection
Humidity 95 % RH
Case material Nickel-coated copper
Weight 18.1 g
Dimensions (L x W x H) 1.00 x 1.00 x 0.40 inches 25.40 x 25.40 x 10.16 mm
o
MTBF > 560,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C)
o
Maximum soldering temperature 1.5mm from case for 10 sec 260 C
Transient recovery time Load step change 75% to 50% to 25% 250 S
Transient recovery deviation Load step change 75% to 50% to 25% 3 %
Safety Specifications
Parameters
Agency Approvals CE, UL
UL 60950-1, UL62368-1
EN 55032 Class A
EN 61000-4-2 Perf. Criteria A
EN 61000-4-3 Perf. Criteria A
Standards
EN 61000-4-4 Perf. Criteria A (external 220uF/100V cap required)
EN 61000-4-5 Perf. Criteria A (external 220uF/100V cap required)
EN 61000-4-6 Perf. Criteria A
EN 61000-4-8 Perf. Criteria A
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832)
F 051e R11.H 2 of 4 North America only
REV: 09/19/A