Click on Series name for product info on aimtec.com Series AM15CW-FZ 15Watt DC-DC Converter FEATURES: Ultra Compact Footprint 1x1 Output Short Circuit Protection Ultra-Wide Input Range 4:1 Operating Temperature -40C to +85C 1500 VDC Isolation Over Voltage, Over Load Protection Remote ON / OFF Function Efficiency up to 89% Models Single output Input Output Output Input Current Max Isolation Efficiency Model Voltage Voltage Current Full No Load Capacitive (VDC) (%) (V) (V) Max (A) (mA) Load (uF) AM15CW-2403S-FZ 9-36 3.3 4 1500 671 59 12000 86 AM15CW-2405S-FZ 9-36 5 3 1500 744 53 6000 88 AM15CW-2412S-FZ 9-36 12 1.3 1500 783 56 2000 87 AM15CW-2415S-FZ 9-36 15 1 1500 753 59 1200 87 AM15CW-4803S-FZ 18-75 3.3 4 1500 335 27 12000 86 AM15CW-4805S-FZ 18-75 5 3 1500 368 24 6000 89 AM15CW-4812S-FZ 18-75 12 1.3 1500 382 28 2000 89 AM15CW-4815S-FZ 18-75 15 1 1500 368 29 1200 89 Models Dual output Input Output Output Input Current Max Isolation Efficiency Model Voltage Voltage Current Full No Load Capacitive (VDC) (%) (V) (V) Max (A) (mA) Load (uF) AM15CW-2405D-FZ 9-36 5 1.5 1500 772 49 3000 85 AM15CW-2412D-FZ 9-36 12 0.625 1500 753 58 1000 87 AM15CW-2415D-FZ 9-36 15 0.5 1500 753 60 600 87 AM15CW-4805D-FZ 18-75 5 1.5 1500 386 23 3000 85 AM15CW-4812D-FZ 18-75 12 0.625 1500 372 28 1000 88 AM15CW-4815D-FZ 18-75 15 0.5 1500 368 30 600 89 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units 24 9-36 Voltage range VDC 48 18-75 Filter Start up time Nominal Vin with constant resistive load 72 ms 24 Vin 50 Absolute Maximum Rating VDC 48 Vin 100 Peak Input Voltage time 100 ms ON 3.5 to 12VDC (or open) OFF 0 to 0.7 VDC or short to Vin pin 2 On/Off control On source current <0.2mA, OFF idle current <12mA 24 Vin ON/OFF 8.5 /7 Under voltage lockout VDC 48Vin ON/OFF 17/15 Input reflected ripple current 60 mA p-p Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 3 sec 1500 VDC Resistance >1000 MOhm Capacitance 550 pF www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11 1 of 3 North America only Series AM15CW-FZ 15Watt DC-DC Converter Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 1 % Over voltage protection Zener Diode Clamp 120 % Over load protection % of Full Load at Nominal Input 110 % Short Circuit protection Continuous Short circuit restart Auto-Recovery Line voltage regulation HL-LL 1.0 % Load voltage regulation (Single) 25% to 100% load 1.0 % balanced load 0.5 Load voltage regulation (Dual) % Unbalanced 25% to 100% 5.0 o Temperature coefficient 0.02 %/ C Ripple & Noise 20MHz Bandwidth 80 mV p-p Voltage adjustment range Trim - Single output models only 10 % Transient recovery time Load step change 50% 560 S di/dt = 0.8A/sec 5 Transient recovery deviation %of Vo 3.3V models 6 General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 330 KHz o Operating temperature With derating above +63C -40 to +85 C o Storage temperature -55 to +125 C o Maximum case temperature 105 C Cooling Free air convection Humidity 95 % RH Case material Nickel-coated copper Potting Material Silicon Rubber (UL94V-0) Weight 19.2 g Dimensions (L x W x H) 1.00 x 1.00 x 0.40 inches 25.40 x 25.40 x 10.20 mm o MTBF > 1,580,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) o Maximum soldering temperature 1.5mm from case for 10 sec 260 C Pin Out Specifications Single Dual Pin 1 + V input + V input 2 - V input - V input 3 On/Off Control On/Off Control 4 + V output + V output 5 Trim Common 6 - V output - V output www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11 2 of 3 North America only