AM15CW-4805SZ Aimtec

Click on Series name for product info on aimtec.com Series AM15CW-Z 15Watt DC-DC Converter FEATURES: Ultra compact footprint 1x1 Adjustable Output Voltage Ultra-wide Input Range 4:1 Operating Temperature -40C to +85C 1600 VDC Isolation Over Current and Over Voltage Protection Remote ON/OFF Function Efficiency up to 89% No Minimum Load Required RoHS Compliant Models Single output Output Max Input Voltage Output Current Isolation Efficiency Model Voltage Capacitive (V) max (A) (VDC) (%) (V) Load (uF) AM15CW-2403SZ 9-36 3.3 4 1600 1000 86 AM15CW-2405SZ 9-36 5 3 1600 1000 87 AM15CW-2412SZ 9-36 12 1.3 1600 330 88 AM15CW-2415SZ 9-36 15 1 1600 220 89 AM15CW-4803SZ 18-75 3.3 4 1600 1000 84 AM15CW-4805SZ 18-75 5 3 1600 1000 86 AM15CW-4812SZ 18-75 12 1.3 1600 330 87 AM15CW-4815SZ 18-75 15 1 1600 220 88 Models Dual output Output Max Input Voltage Output Current Isolation Efficiency Model Voltage Capacitive (V) max (A) (VDC) (%) (V) Load (uF) AM15CW-2405DZ 9-36 5 1.5 1600 470 85 AM15CW-2412DZ 9-36 12 0.625 1600 220 88 AM15CW-2415DZ 9-36 15 0.5 1600 100 89 AM15CW-4805DZ 18-75 5 1.5 1600 470 84 AM15CW-4812DZ 18-75 12 0.625 1600 220 87 AM15CW-4815DZ 18-75 15 0.5 1600 100 88 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units 24 9-36 Voltage range VDC 48 18-75 Filter Start up time Nominal Vin with constant resistive load 20 ms 24 Vin 50 Absolute Maximum Rating VDC 48 Vin 100 Peak Input Voltage time 100 ms On/Off control ON 3 to 12VDC (or open) OFF 0 to 1.2VDC or short pin 2 to pin 3 OFF idle current 5mA No load current 15 mA 24 Vin ON/OFF 8.5 /7 Under voltage lockout VDC 48Vin ON/OFF 17/15 Input reflected ripple current 20 mA p-p Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 3 sec 1600 VDC Case to Input 3 sec 1600 VDC Case to Output 3 sec 1600 VDC Resistance >1000 MOhm Capacitance 1200 pF www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.C 1 of 4 North America only Series AM15CW-Z 15Watt DC-DC Converter Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 1 % 25% load on one output - 100% load Cross Regulation (Dual Output Models) 5 % on second load Over voltage protection Zener Diode Clamp 120 % Over current protection Full Load 170 % Short Circuit protection Continuous Short circuit restart Auto-Recovery Line voltage regulation HL-LL 0.2 % Load voltage regulation (Single) 0% to 100% load 0.5 % Load voltage regulation (Dual) 0% to 100% balanced load 1 % o Temperature coefficient 0.02 %/ C Ripple & Noise 20MHz Bandwidth 100 mV p-p Voltage adjustment range Trim - Single output models only 10 % General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 375 KHz o Operating temperature With derating above +55C -40 to +85 C o Storage temperature -40 to +125 C o Maximum case temperature 100 C o Derating 2.6 %/ C Cooling Free air convection Humidity 95 % RH Case material Nickel-coated copper Weight 18 g Dimensions (L x W x H) 1.00 x 1.00 x 0.40 inches 25.40 x 25.40 x 10.16 mm o MTBF > 560,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) o Maximum soldering temperature 1.5mm from case for 10 sec 260 C Transient recovery time Load step change 75% to 50% to 25% 250 S Transient recovery deviation Load step change 75% to 50% to 25% 3 % Safety Specifications Parameters Agency Approvals CE EN 55022 Class A EN 61000-4-2 Perf. Criteria A EN 61000-4-3 Perf. Criteria A EN 61000-4-4 Perf. Criteria A (external 220uF/100V cap required) Standards EN 61000-4-5 Perf. Criteria A (external 220uF/100V cap required) EN 61000-4-6 Perf. Criteria A EN 61000-4-8 Perf. Criteria A NOTE: also designed to meet IEC/EN 60950-1 Pin Out Specifications Single Dual Pin 1 + V input + V input 2 - V input - V input 3 On/Off Control On/Off Control 4 + V output + V output 5 Trim Common 6 - V output - V output www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.C 2 of 4 North America only