Click on Series name for product info on aimtec.com Series AM1SS-NZ 1 Watt DC-DC Converter FEATURES: o o Unregulated Operating temperature -40 C to +105 C 4 Pin SIP Package Input / Output isolation 1500 VDC Low ripple and noise Pin compatible with multiple manufacturers High efficiency up to 82% Continuous Short Circuit Protection Models Single output Max. Input Voltage Output Voltage Output Current Isolation Efficiency Model Capacitive (V) (V) max (mA) (VDC) (%) Load (F) AM1SS-0303S-NZ 2.97-3.63 3.3 303 1500 220 75 AM1SS-0305S-NZ 2.97-3.63 5 200 1500 220 80 AM1SS-0503S-NZ 4.5-5.5 3.3 303 1500 220 76 AM1SS-0505S-NZ 4.5-5.5 5 200 1500 220 80 AM1SS-0509S-NZ 4.5-5.5 9 111 1500 220 80 AM1SS-0512S-NZ 4.5-5.5 12 84 1500 220 81 AM1SS-0515S-NZ 4.5-5.5 15 67 1500 220 81 AM1SS-0524S-NZ 4.5-5.5 24 42 1500 220 81 AM1SS-1203S-NZ 10.8-13.2 3.3 303 1500 220 76 AM1SS-1205S-NZ 10.8-13.2 5 200 1500 220 80 AM1SS-1209S-NZ 10.8-13.2 9 110 1500 220 80 AM1SS-1212S-NZ 10.8-13.2 12 83 1500 220 81 AM1SS-1215S-NZ 10.8-13.2 15 67 1500 220 80 AM1SS-1224S-NZ 10.8-13.2 24 42 1500 220 80 AM1SS-1515S-NZ 13.5-16.5 15 67 1500 220 81 AM1SS-2403S-NZ 21.6-26.4 3.3 303 1500 220 76 AM1SS-2405S-NZ 21.6-26.4 5 200 1500 220 80 AM1SS-2409S-NZ 21.6-26.4 9 110 1500 220 80 AM1SS-2412S-NZ 21.6-26.4 12 83 1500 220 81 AM1SS-2415S-NZ 21.6-26.4 15 67 1500 220 82 AM1SS-2424S-NZ 21.6-26.4 24 42 1500 220 82 - Please note Aimtec product change announcement located here www.aimtec.com/news for product specification changes th effective February 7 2015. Input Specifications Parameters Nominal Typical Maximum Units 3.3 2.97-3.63 5 4.5-5.5 Voltage range 12 10.8-13.2 VDC 15 13.5-16.5 24 21.6-26.4 3.3 5 5 9 Absolute Max Rating (1 sec. max.) 12 18 VDC 15 21 24 30 Filter Capacitor Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 1500 VDC Resistance > 1000 MOhm Capacitance 20 pF www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.B 1 of 4 North America only Series AM1SS-NZ 1 Watt DC-DC Converter Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy See tolerance graph 5 % Short Circuit protection Continuous with automatic recovery For 1.0% Vin, 3.3V Model 1.5 Line voltage regulation % of Vin For 1.0% Vin, Other Model 1.2 Load voltage regulation Load 10 100% 12 % o Temperature coefficient 0.03 %/ C Ripple & Noise At 20 MHz Bandwidth 60 m Vp-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 100-300 KHz o o Operating temperature Derating Above 85 C -40 to +105 C o Storage temperature -55 to +125 C o Maximum case temperature 125 C Cooling Free air convection Humidity Non condensing 95 % o Soldering Lead Temperature 1.5mm from Lead, for 10 Sec 300 C Case material Plastic UL94-VO Weight 1.2 g Dimensions (L x H x W) 0.46 x 0.40x 0.24 inches 11.60 x 10.10 x 6.00 mm o MTBF >3500K hrs(MIL-HDBK -217F, Ground Benign, t=+25 C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters cULus (without 15V input and without 3.3V output models) Agency approvals Standards UL 60950-1 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.B 2 of 4 North America only