AM20CW-2405S-FZ-K Aimtec

Click on Series name for product info on aimtec.com Series AM20CW-FZ 20Watt DC-DC Converter FEATURES: Ultra Compact Footprint 1x1 Output Short Circuit Protection Ultra-Wide Input Range 4:1 Operating Temperature -40C to +85C 1500 VDC Isolation Over Voltage, Over Load Protection Remote ON / OFF Function Efficiency up to 91% Models Single output Input Output Output Input Current Max Isolation Efficiency Model Voltage Voltage Current Full No Load Capacitive (VDC) (%) (V) (V) Max (A) (mA) Load (uF) AM20CW-2403S-FZ-K 9-36 3.3 4.5 1500 755 63 24700 86 AM20CW-2405S-FZ-K 9-36 5 4 1500 992 63 14700 88 AM20CW-2412S-FZ-K 9-36 12 1.67 1500 970 83 4700 90 AM20CW-2415S-FZ-K 9-36 15 1.33 1500 967 70 2200 90 AM20CW-4803S-FZ-K 18-75 3.3 4.5 1500 373 29 32200 87 AM20CW-4805S-FZ-K 18-75 5 4 1500 490 30 23300 89 AM20CW-4812S-FZ-K 18-75 12 1.67 1500 486 38 3300 90 AM20CW-4815S-FZ-K 18-75 15 1.33 1500 477 32 1000 91 Models Dual output Input Output Output Input Current Max Isolation Efficiency Model Voltage Voltage Current Full No Load Capacitive (VDC) (%) (V) (V) Max (A) (mA) Load (uF) AM20CW-2405D-FZ-K 9-36 5 2 1500 990 59 7000 86 AM20CW-2412D-FZ-K 9-36 12 0.833 1500 992 60 2200 88 AM20CW-2415D-FZ-K 9-36 15 0.667 1500 981 83 1000 89 AM20CW-4805D-FZ-K 18-75 5 2 1500 490 35 7000 86 AM20CW-4812D-FZ-K 18-75 12 0.833 1500 490 35 680 89 AM20CW-4815D-FZ-K 18-75 15 0.667 1500 490 35 470 88 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units 24 9-36 Voltage Range VDC 48 18-75 Filter Start Up Time Nominal Vin with constant resistive load 76 ms 24 Vin 50 Absolute Maximum Rating VDC 48 Vin 100 ON 3.5 to 12VDC (or open) OFF 0 to 0.7 VDC or short to Vin pin 2 On/Off Control On source current <0.2mA, OFF idle current <12mA Input Reflected Ripple Current 60 mA p-p Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O Voltage 3 sec 1500 VDC Resistance >1000 MOhm Capacitance 450 pF www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11 1 of 3 North America only Series AM20CW-FZ 20Watt DC-DC Converter Output Specifications Parameters Conditions Typical Maximum Units Voltage Accuracy 1 % Over Voltage Protection Zener Diode Clamp 120 % Over Load Protection % of Full Load at Nominal Input 110 % Short Circuit Protection Continuous Short Circuit Restart Auto-Recovery Line Voltage Regulation HL-LL 1.0 % Load Voltage Regulation (Single) 25% to 100% load 1.0 % balanced load 0.5 Load Voltage Regulation (Dual) % Unbalanced 25% to 100% 5.0 o Temperature Coefficient 0.02 %/ C Ripple & Noise 20MHz Bandwidth 80 mV p-p Voltage Adjustment Range Trim - Single output models only 10 % Transient Recovery Time Load step change 50% 700 S Others 5 Transient Recovery Deviation %of Vo 3.3V models 6 General Specifications Parameters Conditions Typical Maximum Units Switching Frequency 100% load 330 KHz o Operating Temperature With derating above +60C -40 to +85 C o Storage Temperature -55 to +125 C o Maximum Case Temperature 105 C Cooling Free air convection Humidity 95 % RH Case Material Nickel-coated copper Potting Material Silicon Rubber (UL94V-0) Weight 23.4 g Dimensions (L X W X H) 1.00 x 1.00 x 0.66 inches 25.40 x 25.40 x 16.80 mm o MTBF > 350,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) o Maximum Soldering Temperature 1.5mm from case for 10 sec 260 C Pin Out Specifications Single Dual Pin 1 + V input + V input 2 - V input - V input 3 On/Off Control On/Off Control 4 + V output + V output 5 Trim Common 6 - V output - V output www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11 2 of 3 North America only