Click on Series name for product info on aimtec.com Series AM2LW-NZ 1.5 Watt DC-DC Converter FEATURES: SMD package Operating temperature: -40C to +85C Ultra Wide (4:1) input range Regulated single/dual output 1500VDC isolation MTBF>1,000,000 hours Continuous short circuit RoHS compliant protection Models: Single output Output Voltage Output Current Isolation Efficiency Model Input Voltage(V) (V) max(mA) (VDC) (%) AM2LW-2403S-NZ 9-36 3.3 455 1500 72 AM2LW-2405S-NZ 9-36 5 300 1500 76 AM2LW-2409S-NZ 9-36 9 167 1500 78 AM2LW-2412S-NZ 9-36 12 125 1500 79 AM2LW-2415S-NZ 9-36 15 100 1500 80 AM2LW-4805S-NZ 18-72 5 300 1500 76 Models: Dual output Input Voltage Output Voltage Output Current Isolation Efficiency Model max (mA) (V) (V) (VDC) (%) AM2LW-2405D-NZ 9-36 5 150 1500 74 AM2LW-2412D-NZ 9-36 12 63 1500 77 AM2LW-2415D-NZ 9-36 15 50 1500 75 NOTE 1: Add suffix TR to a part number when ordering in tape and reel package NOTE 2: Unless otherwise specified, all specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load. Input Specifications Parameters Nominal Typical Maximum Units 24 9-36 Voltage range VDC 48 18-72 24 40 Absolute Maximum Rating VDC 48 80 Peak Input Voltage time 100 ms Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 1500 VDC Resistance At 500 Vdc 1000 MOhm Capacitance Input to Output 1000 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 5 % Short Circuit protection Continuous Short circuit restart Auto-Recovery Line voltage regulation From Low in to High In 0.75 % Load voltage regulation (Single) From 10% to 100% load 1.5 % From 10% to 100% load Load voltage regulation (Dual) 5 % Unbalanced load o Temperature coefficient 0.03 %/ C Ripple & Noise 20MHz Bandwidth 100 mV p-p Minimum Load Current* 10 % of Max * Operation under 10% load will not damage the converter however, not all specifications will be met. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.G 1 of 3 North America only Series AM2LW-NZ 1.5 Watt DC-DC Converter General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 550 KHz o Operating temperature -40 to +85 C o Storage temperature -55 to +125 C o Maximum case temperature 100 C o Derating Above 71 2.9 %/ C Cooling Free Air Convection Humidity 95 % RH Case material Plastic (UL94-V0) Weight 5.2 g Dimensions (L x W x H) 0.94 x 0.54 x 0.32 inches 23.86 x 13.70 x 8.00mm MTBF >1,000,000 hours(MIL-HDBK -217F, Ground Benign, t=+25C) o Maximum Soldering Temperature 1.5mm from case for 10 seconds 300 C . Pin Out Specifications Pin Single Dual 1 - Vin - Vin 7 NC NC 8 NC Common 9 +Vout +Vout 10 - Vout -Vout 16 + Vin + Vin NC not connected Dimensions Front View Side View 23.86 15.00 (0.94) (0.59) A A 7.50 8.20 0.50 (0.30) (0.32) (0.02) 0.50 (0.02) 5.00 angle 13.10 (0.52) 1.36 17.50 (0.05) MAX Top View (0.69) 23.86 (0.94) 0.80 (0.03) Footprint 1.02 0.50 (0.04) (0.02) 16 10 9 13.70 18.50 (0.54) (0.73) 1 8 7 0.20 (0.08) 15.24 3.04 15.24 2.54 2.54 (0.60) (0.12) (0.60) (0.10) (0.10) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.G 2 of 3 North America only