Click on Series name for product info on aimtec.com Series AM30E-Z 30Watt DC-DC Converter FEATURES: Wide 2:1 Input Range Efficiency up to 92% 1600 VDC I/O Isolation Temperature Range -40C to +75C Adjustable Output Voltage Remote On/Off Function Soft Start Continuous Short Circuit Protection Over Current & Over Voltage Protection No Minimum Load Required Over Temperature Protection Models Single output Maximum Input Voltage Output Voltage Output Current Efficiency Model Capacitive Load (V) (V) max (A) (%) (uF) AM30E-1203SZ 9-18 3.3 8 20000 89 AM30E-1205SZ 9-18 5 6 14000 91 AM30E-1205.1SZ 9-18 5.1 6 14000 92 AM30E-1212SZ 9-18 12 2.5 2000 91 AM30E-1215SZ 9-18 15 2 2000 92 AM30E-2403SZ 18-36 3.3 8 20000 91 AM30E-2405SZ 18-36 5 6 14000 92 AM30E-2405.1SZ 18-36 5.1 6 14000 92 AM30E-2412SZ 18-36 12 2.5 2000 92 AM30E-2415SZ 18-36 15 2 2000 92 AM30E-4803SZ 36-75 3.3 8 20000 90 AM30E-4805SZ 36-75 5 6 14000 91 AM30E-4805.1SZ 36-75 5.1 6 14000 91 AM30E-4812SZ 36-75 12 2.5 2000 91 AM30E-4815SZ 36-75 15 2 2000 91 Add suffix -K for optional heat sink Models Dual output Maximum Input Voltage Output Voltage Output Current Efficiency Model Capacitive Load (V) (V) max (mA) (%) (uF) AM30E-1205DZ 9-18 5 3 3000 89 AM30E-1212DZ 9-18 12 1.25 1300 90 AM30E-1215DZ 9-18 15 1 1300 91 AM30E-2405DZ 18-36 5 3 3000 90 AM30E-2412DZ 18-36 12 1.25 1300 91 AM30E-2415DZ 18-36 15 1 1300 91 AM30E-4805DZ 36-75 5 3 3000 90 AM30E-4812DZ 36-75 12 1.25 1300 90 AM30E-4815DZ 36-75 15 1 1300 90 Add suffix -K for optional heat sink NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units 12 9-18 Voltage range 24 18-36 VDC 48 36-75 Filter (Pi) Network Start up time 30 ms 12 -0.7 ~ 25 Absolute Maximum Rating 24 -0.7 ~ 50 VDC 48 -0.7 ~ 100 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.E 1 of 5 North America only Series AM30E-Z 30Watt DC-DC Converter Input Specifications (continued) Parameters Nominal Typical Maximum Units Peak Input Voltage time 100 ms On/Off control ON: 3 ~12VDC or open circuit OFF - 0 ~ 1.2VDC or Short circuit between pin 2 and pin 3 12V ON/OFF 8.6 / 7.9 Under voltage lockout 24V ON/OFF 17.8 / 16 VDC 48V ON/OFF 33.5 / 30.5 Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 3 sec 1600 VDC Case/Input tested voltage 3 sec 1600 VDC Resistance 1000 MOhm Capacitance 1500 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 1 % 25% load on one output Cross Regulation (Dual Output Models) 5 % 100% load on second load Over voltage protection Zener diode clamp Over current protection 150 % Short Circuit protection Continuous Short circuit restart Auto-Recovery Thermal shutdown On Case 115 C Line voltage regulation HL-LL 0.5 % Load voltage regulation (Single) 0 100% load 0.5 % Load voltage regulation (Dual) 0 100% load 1 % o Temperature coefficient 0.02 %/ C Ripple & Noise 20MHz Bandwidth 100 mV p-p Voltage adjustment range (single) 10 % Minimum Load Current 0 % of Max General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 330 KHz o Operating temperature Derating above 50 -40 to +75 C o Storage temperature -40 to +125 C o Maximum case temperature 105 C o Derating 2 %/ C Cooling Free Air Convection Humidity 95 % RH Case material Nickel coated Copper Weight 31 g Dimensions (L x W x H) 2.00 x 1.00 x 0.40 inches 50.80 x 25.40 x 10.16 mm MTBF >435,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25C)hours o Maximum soldering temperature 1.5mm from case for 10 sec 260 C Transient recovery time 250 mS Transient recovery deviation 3 % Safety Specifications Parameters Agency Approvals CE EN55022 Class A IEC61000-4-2, Perf. Criteria B Standards IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria A (external 220uF/100V cap required) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.E 2 of 5 North America only