AM3T-0505D-NZ Aimtec

Click on Series name for product info on aimtec.com Series AM3T-NZ 3 Watt DC-DC Converter FEATURES: o o RoHS compliant Operating temperature -40 C to + 85 C 24 Pin DIP Package Input / Output Isolation 1500VDC Shielded metal package Pin compatible with multiple manufacturers High efficiency up to 78% Continuous short circuit protection Wide 2:1 input range Models Single output Output Max. Cap. Input Output Current Isolation Efficiency Model Voltage Load Voltage (V) max (mA) (VDC) (%) (V) (F) AM3T-0505S-NZ 4.5-9 5 600 1500 4700 74 AM3T-0512S-NZ 4.5-9 12 250 1500 2700 77 AM3T-0515S-NZ 4.5-9 15 200 1500 2200 77 Models Dual output Output Max. Cap. Input Output Current Isolation Efficiency Model Voltage Load Voltage (V) max (mA) (VDC) (%) (V) (F) AM3T-0505D-NZ 4.5-9 5 300 1500 2200 76 AM3T-0512D-NZ 4.5-9 12 125 1500 1800 78 AM3T-0515D-NZ 4.5-9 15 100 1500 1000 78 NOTE: All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units Voltage range 5 4.5-9 5 Vin VDC Filter (Pi) Network Absolute Maximum 5 Vin 12 VDC Isolation Specifications Parameters Conditions Typical Maximum Units Tested I/O voltage 60 sec 1500 VDC Resistance > 1000 MOhm Capacitance 120 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 1 % Dual Output Voltage Balance Balanced Loads 0.5 % Short Circuit protection Continuous Short circuit restart Auto-recovery Line voltage regulation 0.2 % Load voltage regulation 0.2 % o Temperature coefficient 0.03 %/ C Ripple& Noise 20MHz bandwidth 75 mV p-p Transient Recovery Time 25% Load Step 0.5 m sec Transient Deviation 25% Load Step 2 % www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R6.D 1 of 3 North America only Series AM3T-NZ 3 Watt DC-DC Converter General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 200 KHz o Operating temperature With derating above +85C -40 to +85 C o Storage temperature -55 to +125 C o Max Case temperature 100 C o o o Temperature Rise Full Load, 25 C 25 C C 1.5mm from case for 10 o Lead Temperature 300 C Seconds Cooling Free air convection Humidity 95 % Case material Black Anodized Aluminum Weight 14 g Dimensions (L x W x H) 1.26 x 0.80 x 0.42 inches 32. 00 x 20.00 x 10.80mm o MTBF >1 000000 hrs(MIL-HDBK -217F, Ground Benign, t=+25 C) Pin Out Specifications Dimensions 1500VDC 23.03 Pin Single Dual 32.00 (0.91) 1 No pin No pin 0.50 (1.26) 2 -V Input -V Input (0.02) 3 -V Input -V Input 9 No pin Common 2 3 9 11 10 No pin No pin 11 N.C. -V Output Bottom View 12/13 No pin No pin 23 22 16 14 14 +V Output +V Output 15 No pin No pin 2.54 5.08 16 -V Output Common (0.10) (0.20) 22 V+ Input +V Input 23 V+ Input +V Input 24 No pin No pin Built-in Stand-offs to Printed Face ease PCB cleaning N.C.: not connected Filtering Single output Filtering Dual output External capacitors Vin Cin) Vout Cout (VDC) (uF) (VDC) (uF) 5 10 5 100 12 10 15 10 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R6.D 2 of 3 North America only 10.80 20.00 (0.42) (0.80) 4.10 (0.16) 15.24 (0.60)