AM40E-4805SZ Aimtec

Click on Series name for product info on aimtec.com Series AM40E-Z 40 Watt DC-DC Converter FEATURES: Wide 2:1 Input Range Efficiency up to 92% Adjustable Single Output Voltage Remote On/Off Function Undervoltage lockout Soft start High Power Density Models Single output Maximum Input Voltage Output Voltage Output Current Efficiency Model Capacitive load (V) (V) max (A) (%) (F) AM40E-1203SZ 9-18 3.3 8 21800 90 AM40E-1205SZ 9-18 5 8 13600 91 AM40E-1212SZ 9-18 12 3.33 2300 91 AM40E-1215SZ 9-18 15 2.67 1500 91 AM40E-2403SZ 18-36 3.3 8 21800 91 AM40E-2405SZ 18-36 5 8 13600 92 AM40E-2412SZ 18-36 12 3.33 2300 91 AM40E-2415SZ 18-36 15 2.67 1500 92 AM40E-4803SZ 36-75 3.3 8 21800 91 AM40E-4805SZ 36-75 5 8 13600 92 AM40E-4812SZ 36-75 12 3.33 2300 91 AM40E-4815SZ 36-75 15 2.67 1500 92 Add suffix -K for optional heat sink Models Dual output Maximum Input Voltage Output Voltage Output Current Efficiency Model Capacitive load (V) (V) max (A) (%) (F) AM40E-1212DZ 9-18 12 1.67 1200 91 AM40E-1215DZ 9-18 15 1.33 750 92 AM40E-2412DZ 18-36 12 1.67 1200 91 AM40E-2415DZ 18-36 15 1.33 750 92 AM40E-4812DZ 36-75 12 1.67 1200 92 AM40E-4815DZ 36-75 15 1.33 750 92 Add suffix -K for optional heat sink NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units 12 9-18 Voltage range 24 18-36 VDC 48 36-75 Filter (Pi) Network Start up time 30 ms 12 25 Absolute Maximum Rating 24 50 VDC 48 100 Peak Input Voltage time 1 s ON: 3 ~12VDC or open circuit OFF 0 ~ 1.2VDC or Short circuit between pin 2 and pin 3 On/Off control (OFF idle current: 5mA Typical) 12V ON/OFF 8.6 / 7.9 Under voltage lockout 24V ON/OFF 17.8 / 16 VDC 48V ON/OFF 33.5 / 30.5 Input Reflected Ripple Current 20 mA p-p www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.D 1 of 7 North America only Series AM40E-Z 40 Watt DC-DC Converter Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 3 sec 1600 VDC Case/Input and Output 3 sec 1600 VDC Resistance <1000 MOhm Capacitance 1000 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 1 % 25% load on one output Cross Regulation (Dual Output Models) 5 % 100% load on second load Over voltage protection Zener diode clamp Over load protection 130 % of Iout Short Circuit protection Continuous Short circuit restart Auto-Recovery Line voltage regulation HL-LL 0.5 % Load voltage regulation (Single) 0% to 100% load 0.5 % Load voltage regulation (Dual) 0% to 100% load 1 % o Temperature coefficient 0.02 %/ C 3.3Vout/5Vout 100 Ripple & Noise (20MHz Bandwidth) mV p-p other models 150 Voltage adjustment range (single) 10 % Minimum Load Current 0 % of Max General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 270 KHz o Operating temperature See derating chart -40 to +71 C o Storage temperature -40 to +125 C o Maximum case temperature 105 C o Derating 2.5 %/ C Cooling Free Air Convection Humidity 95 % RH Case material Nickel coated Copper Weight 32 g Dimensions (L x W x H) 2.00 x 1.00 x 0.40 inches 50.80 x 25.40 x 10.16 mm MTBF >328,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25C)hours o Maximum soldering temperature 1.5mm from case for 10 sec 260 C Transient recovery time 250 S Transient recovery deviation 3 % Safety Specifications Parameters Agency Approval CE EN55022: 2006 + A1:2007, Class B IEC61000-3-2:2006+A2:2009 IEC61000-3-3:2008 EN55024:1998 + A1:2001 + A2:2003 IEC61000-4-2: 2008 Safety IEC61000-4-3:2006+A1: 2007 IEC61000-4-4:2004 IEC61000-4-5:2005 IEC61000-4-6:2008 IEC61000-4-8:2009 NOTE: also designed to meet IEC 60950-1:2001 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.D 2 of 7 North America only