Click on Series name for product info on aimtec.com Series AMEL10-AZ 10 Watt AC-DC / DC-DC Converter FEATURES: I/O Isolation 3000VAC RoHS Compliant o o Operating Temp: -40 C to +80 C Energy Star Compliant Input: 90-305VAC, 47-440Hz, or 130-430VDC Efficiency up to 83% Over Load, Over Voltage, Short Circuit Protection Soft Start Models CB Single output Efficiency Maximum Input Input Temperature Output Output capacitive (%) Model Voltage Voltage range Voltage Current Load 115 230 277 (VAC/Hz) (VDC) (C) (V) max (A) VAC VAC VAC (F) AMEL10-3.3SAZ 90-305/47-440 130-430 -40 to +80 3.3 3.00 2200 75 74 73 AMEL10-5SAZ 90-305/47-440 130-430 -40 to +80 5 2.00 1000 77 75 74 AMEL10-12SAZ 90-305/47-440 130-430 -40 to +80 12 0.84 680 83 82 81 AMEL10-15SAZ 90-305/47-440 130-430 -40 to +80 15 0.67 470 83 81 80 AMEL10-24SAZ 90-305/47-440 130-430 -40 to +80 24 0.42 470 82 81 79 Note: Optional mounting plate version can be ordered by adding -ST suffix to part number (ex. AMEL10-5SAZ-ST) Input Specifications Parameters Conditions Typical Maximum Units 115 VAC 230 mA 230 VAC 150 mA Current (full load) 277 VAC 140 mA 115 VAC 20 A Inrush current <2ms (cold start) 230 VAC 35 A 277 VAC 50 A Leakage current 0.25 mA External fuse Recommended slow blow type 1 A Input dissipation (110/230/277 VAC) 0.2 W Start-up time 50 ms Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 2 % Line regulation 1 % Load regulation 0-100% load 2 % Transient recovery time 500 s Transient response deviation 25% load step 2 % of Vout 3.3/5V models 75 mV p-p Ripple & Noise* 12/15V models 100 mV p-p 24V models 150 mV p-p Hold-up time 15 ms * Ripple and Noise are measured at 20MHz bandwidth by using a 0.1F (M/C) and 47F (E/C) parallel capacitor. Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 3000 VAC Isolation Resistance >1000 M General Specifications Parameters Conditions Typical Maximum Units Switching frequency 66 KHz Over load protection Foldback 130 % Over voltage protection Zener Diode Clamp www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.K 1 of 5 North America only Series AMEL10-AZ 10 Watt AC-DC / DC-DC Converter General Specifications (continued) Parameters Conditions Typical Maximum Units Short circuit protection Auto recovery o Operating temperature With derating over 60C Refer to model application C o Storage temperature -40 to +95 C o Maximum case temperature 100 C o Temperature coefficient 0.02 % / C Cooling Free air convection Humidity Non condensing 20 ~ 95 % RH Case material Plastic (flammability to UL 94V-0) Weight 70 g Dimensions (L x W x H) 56.48 x 30.86 x 25.10mm (2.22 x 1.21 x 0.99inches) o > 400 000 hrs (MIL-HDBK -217F, t=+25 C)/ Full Load MTBF > 100,000 hrs (MIL-HDBK -217F, t=at highest operating temperature)/Full Load NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Environment Approval Test Parameters Conditions Wave form Half sine wave Acceleration amplitude 5gn Shock Bump duration 30 ms Converter operation before and after test, body mounted (on chassis) Number of bumps 18 (3 in each direction for every axis) Test mode Sweep sine Displacement 1mm Vibration Acceleration 3g Converter operation 10-100Hz, speed 0.05Hz/s Safety Specifications Parameters Agency approvals cULus, CE, CB Information technology Equipment EN 60950-1:2006+A11:2009 EMI - Conducted and radiated emission EN55022, class B Harmonic Current Emissions IEC/EN 61000-3-2, Class A Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3) Electrostatic Discharge Immunity IEC 61000-4-2 Level 3 RF, Electromagnetic Field Immunity IEC 61000-4-3 Level 2 Standards Electrical Fast Transient/Burst Immunity IEC 61000-4-4 Level 2 Surge Immunity IEC 61000-4-5 Level 3 RF, Conducted Disturbance Immunity IEC 61000-4-6 Level 2 Power frequency Magnetic Field Immunity IEC 61000-4-8 Voltage dips, Short Interruptions Immunity IEC 61000-4-11 Information Technology Equipment UL 60950-1:2007 Information Technology Equipment CAN/CSA-C22.2 No.60950-1-07 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.K 2 of 5 North America only