Click on Series name for product info on aimtec.com Series AMEL5-MAZ 5 Watt AC-DC / DC-DC Converter FEATURES: I/O Isolation 4000VAC RoHS compliant Operating Temp: -40 C to +80 C or -25 C to +80 C Energy Star compliant Input: 90-264VAC, 47-440Hz, or 130-370VDC Small package Over load, Over Voltage, Short Circuit Protection Soft start Models CB Single output Efficiency Maximum Input Temperature Output Output Input Voltage capacitive (%) Model Voltage range Voltage Current max (VAC/Hz) Load 115 230 (VDC) (C) (V) (A) VAC VAC (F) AMEL5-3.3SMAZ 90-264/47-440 130-370 -40 to +80 3.3 1. 5 2200 71 70 AMEL5-5SMAZ 90-264/47-440 130-370 -40 to +80 5 1 1100 74 74 AMEL5-12SMAZ 90-264/47-440 130-370 -40 to +80 12 0.42 680 77 75 AMEL5-15SMAZ 90-264/47-440 130-370 -40 to +80 15 0.333 330 77 76 AMEL5-24SMAZ 90-264/47-440 130-370 -40 to +80 24 0.21 220 76 75 AMEL5-3.3SEMAZ 90-264/47-440 130-370 -40 to +80 3.3 1. 5 2200 71 70 AMEL5-5SEMAZ 90-264/47-440 130-370 -40 to +80 5 1 1100 74 74 AMEL5-12SEMAZ 90-264/47-440 130-370 -40 to +80 12 0.42 680 76 76 AMEL5-15SEMAZ 90-264/47-440 130-370 -40 to +80 15 0.333 330 76 76 AMEL5-24SEMAZ 90-264/47-440 130-370 -40 to +80 24 0.21 220 76 75 Note: Optional mounting plate version can be ordered by adding -ST suffix to part number (ex. AMEL5-5SMAZ-ST) Models Dual output Maximum Efficiency Input Temperature Output Output (%) Input Voltage capacitive Model Voltage range Voltage Current max (VAC/Hz) load 115 230 (VDC) (C) (V) (A) VAC VAC (F) AMEL5-5DMAZ 90-264/47-440 130-370 -40 to +80 5 0.5 470 72 72 AMEL5-12DMAZ 90-264/47-440 130-370 -40 to +80 12 0.21 220 73 73 AMEL5-15DMAZ 90-264/47-440 130-370 -40 to +80 15 0.168 150 72 73 AMEL5-5DEMAZ 90-264/47-440 130-370 -40 to +80 5 0.5 470 72 72 AMEL5-12DEMAZ 90-264/47-440 130-370 -40 to +80 12 0.21 220 73 73 AMEL5-15DEMAZ 90-264/47-440 130-370 -40 to +80 15 0.168 150 72 73 Note: Optional mounting plate version can be ordered by adding -ST suffix to part number (ex. AMEL5-5SMAZ-ST) Input Specifications Parameters Conditions Typical Maximum Units 115 VAC 120 mA Current (full load) 230 VAC 70 mA 115 VAC 15 A Inrush current <2ms (cold start) 230 VAC 30 A Leakage current 0.2 mA External fuse Recommended slow blow type 1.5 A Input Dissipation (No Load) No load (110/230VAC) 0.1 W Start up time Soft Start 780 mS Under Voltage Protection 85 VAC Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 2 % Line regulation 1 % www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.U 1 of 5 North America only Series AMEL5-MAZ 5 Watt AC-DC / DC-DC Converter Load regulation (single output) 0-100% load 1 % st nd Cross Regulation (dual output) 25% load 1 out, 100% load 2 5 % out Transient Recovery Time 300 s Transient Response Deviation 25% load step 2 % of Vout Minimum load 0 % 3.3 / 5V models 75 Ripple & Noise * 12 / 15V models 100 mV p-p 24V 150 Hold-up time (minimum) 15 ms *Ripple and Noise are measured at 20MHz bandwidth by using a 0.1F (M/C) and 47F (E/C) parallel capacitor. Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 4000 VAC Isolation Resistance >1000 M General Specifications Parameters Conditions Typical Maximum Units Switching frequency 132 KHz Protection class Class II Over Load protection Fold back Over voltage protection Zener diode clamp Short circuit protection Auto recovery o Operating temperature With derating above 50C Refer to the models table above C o Storage temperature -40 to +95 C o Maximum Case temperature 100 C o Temperature coefficient 0.02 % / C Cooling Free air convection Humidity Non condensing 20 ~ 95 % RH Case material Plastic (flammability to UL 94V-0) Weight 30 g Dimensions (L x W x H) 2.03 x 1.10 x 0.70 inches 51.5 x 28 x 17.8mm o > 400,000 hrs (MIL-HDBK -217F, t=+25 C)/Full Load MTBF > 100,000 hrs (MIL-HDBK -217F, t=at highest operating temperature)/Full Load NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Environment Approval Parameters Conditions Wave form: Half sine wave Acceleration amplitude: 5gn Shock Bump duration: 30 ms Number of bumps: 18 (3 in each direction for every axis) Converter operation before and after test, body mounted (on chassis) Test mode: Sweep sine 10-100Hz, speed 0.05Hz/s Displacement: 1mm Vibrations Acceleration: 3g 3 loops 30min one cycle, 3h total, every axis tested Converter operation before and after test, body mounted (on chassis) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.U 2 of 5 North America only