Click on Series name for product info on aimtec.com Series AMEOR30-AZ up to 2.5A AC-DC / DC-DC LED driver FEATURES: AC-DC Constant current LED Driver Over Temperature Protection Input range 90-277VAC/47-440Hz Open frame High Efficiency up to 86% Power Factor Correction Operating temperature -40 to 80C SCP, Over Current Protection Dimmable via analog / 0-10Vdc / PWM 5 Years Limited Warranty (C version see table) Models Single output Max Output Output Output Input Voltage Input Voltage Efficiency Model Voltage Current Power (VAC/Hz) (VDC) (%) Range (V) (A) (W) * AMEOR30-5070AZ 35 36-50 0.7 90-277/47-440 130-390 86 AMEOR30-4864AZ 30.72 36-48 0.64 90-277/47-440 130-390 86 AMEOR30-36100AZ 36 24-36 1 90-277/47-440 130-390 85 AMEOR30-24140AZ 33.6 12-24 1.4 90-277/47-440 130-390 84 AMEOR30-12250AZ 30 5-12 2.5 90-277/47-440 130-390 83 *Exceeding the maximum output power will permanently damage the converter All models can be ordered with optional North American colour input wires (black (L), white (N), green (GND)). Add NA to part number when ordering. NOTE: Aimtec limited warranty of 5 years is valid based on product operation at datasheet specifications at ambient temperature of 25C, humidity<75%, nominal input voltage (115/230/277VAC) and at rated output load unless otherwise specified. See Series AMEOR30-AZ up to 2.5A AC-DC / DC-DC LED driver Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 3sec 3000 VAC Isolation Resistance >1000 M General Specifications Parameters Conditions Typical Maximum Units Switching frequency 130 KHz AMEOR30-5070AZ 0.77 AMEOR30-4864AZ 0.68 Over current protection AMEOR30-36100AZ 1.04 A AMEOR30-24140AZ 1.45 AMEOR30-12250AZ 2.55 Over voltage protection Refer to Constant Current vs. Constant Voltage Mode curve Short circuit protection Continuous Short circuit restart Auto recovery Over temperature protection >105C o Operating temperature With derating over 60C -40 to +80 C o Maximum case temperature 100 C o Storage temperature -40 to +95 C o Temperature coefficient 0.02 % / C Cooling Free air convection Humidity 95 % RH Wires UL1015 18AWG * 20CM Weight 220 g Dimensions (L X H X W) 5.83 x 1.97 x 1.3 inches 148 x 50 x 33 mm MTBF >400,000 hrs (MIL-HDBK-217F at +25C) Environment Approval Test Parameters Conditions Wave form Half sine wave Acceleration amplitude 5gn Shock Bump duration 30 ms Converter operation Before and after test, body mounted (on chassis) Number of bumps 18 (3 in each direction for every axis) Test mode Sweep sine, 10-100Hz, speed 0.05Hz/s Displacement 1 mm Vibration Acceleration 3g, 3 loops 30min one cycle, 3h total, every axis tested Converter operation Before and after test, body mounted (on chassis) Safety Specifications Parameters Agency approvals cULus, CE UL8750, UL60950-1, EN55022, class B Information Technology Equipment EN55022 Class B Harmonic Current Emissions IEC/EN 61000-3-2, Class C Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3) Electrostatic Discharge Immunity IEC 61000-4-2 Level 3 Standards RF, Electromagnetic Field Immunity IEC 61000-4-3 Level 2 Electrical Fast Transient / Burst Immunity IEC 61000-4-4 Level 2 Surge Immunity IEC 61000-4-5 Level 3 RF, Conducted Disturbance Immunity IEC 61000-4-6 Level 2 Power frequency Magnetic Field Immunity IEC 61000-4-8 Level 1 Voltage dips, Short Interruptions Immunity IEC 61000-4-11 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.J 2 of 15 North America only