Click on Series name for product info on aimtec.com Series AMER120-CAZ up to 5A AC-DC / DC-DC LED Driver / Converter FEATURES: Constant Current or Constant Voltage LED Short Circuit Protection Driver or Converter Over Current Protection Input range 90-305VAC/47-440Hz Waterproof Case rated IP68 115VAC Operating temperature -50 to 85C Power Factor Correction 230VAC Operating temperature -55 to 85C High Efficiency up to 88% Dimmable via resistive Models 5 Years Limited Warranty Single output Max Output Efficiency Output Input Input Output Voltage (%) Model Current Voltage Voltage Mode of Operation Power Range 115 230 277 (A) (VAC/Hz) (VDC) VAC VAC VAC (W) (V) Constant Current 87 88 86 AMER120-50250CAZ 125 36-50 0-2.5 90-305/47-440 130-430 87 88 88 Constant Voltage Constant Current 87 88 88 AMER120-36340CAZ 122.4 24-36 0-3.4 90-305/47-440 130-430 87 88 88 Constant Voltage Constant Current 85 86 87 AMER120-24500CAZ 120 12-24 0-5 90-305/47-440 130-430 Constant Voltage 86 86 87 Add Suffix -F No dimming option Exceeding the maximum output power will permanently damage the converter. The dimming feature is not supported when units are used in Constant Voltage mode only, Aimtec suggests to order -F No dimming option in the case. In constant current mode output current is maximum shown, in constant voltage mode output voltage is the maximum shown. All models can be ordered with optional North American colour input wires (black (L), white (N), green (GND)). Add NA to part number when ordering. NOTE: Aimtec limited warranty of 5 years is valid based on product operation at datasheet specifications at ambient temperature of 25C, humidity<75%, nominal input voltage (115/230/277VAC) and at rated output load unless otherwise specified. See Series AMER120-CAZ up to 5A AC-DC / DC-DC LED Driver / Converter Line regulation LL-HL 2 % Load regulation 0-100% load 3 % 20MHz Bandwidth 150 mV p-p Ripple & Noise Hold-up time 80 ms Current adjustment range 100-10 % Minimum Load Voltage See the models table Ripple and Noise are measured at 20MHz bandwidth by using a 0.1F (M/C) or (C/C) and 47F (E/C) parallel capacitor. Note: from 0% to 10% dimming adjustment signal instability may be present. Isolation Specifications Parameters Conditions Typical Rated Units I/O 3sec 3750 VAC Tested voltage I/FG 2000 VAC O/FG 500 VAC Isolation resistance 500VDC >1000 M General Specifications Parameters Conditions Typical Maximum Units Switching frequency 125 KHz AMER120-50250CAZ 2.57 AMER120-36340CAZ 3.47 Over current protection A AMER120-24500CAZ 5.07 Over voltage protection Refer to Constant Current vs. Constant Voltage Mode curve Short circuit protection Continuous Short circuit restart Auto recovery o Operating temperature (115VAC) -50 to +85 C o (See Derating Table) (230VAC) -55 to +85 C Cold Start-up Time -55C 30 Sec o Maximum case temperature 100 C o Storage temperature -55 to +95 C o Temperature coefficient 0.02 % / C Cooling Free air convection Humidity 95 % RH Case material Aluminum Potting Epoxy (IP68 rated) Wires UL1015 18AWG Input & 14AWG Output *20CM Weight 900 g Dimensions (L X H X W) 7.13 x 2.32 x 1.85 inches 181.00 x 59.00 x 47.00 mm MTBF >400,000 hrs (MIL-HDBK-217F at +25C) Safety Specifications Parameters Agency approvals CE Designed to meet UL8750, IEC/EN 60950-1 standards, EN55022, class B, EN60529(IP68) Information Technology Equipment EN55022 Class B Harmonic Current Emissions IEC/EN 61000-3-2, Class C Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3) Electrostatic Discharge Immunity IEC 61000-4-2 Level 3 Standards RF, Electromagnetic Field Immunity IEC 61000-4-3 Level 2 Electrical Fast Transient / Burst Immunity IEC 61000-4-4 Level 2 Surge Immunity IEC 61000-4-5 Level 3 RF, Conducted Disturbance Immunity IEC 61000-4-6 Level 2 Power frequency Magnetic Field Immunity IEC 61000-4-8 Level 1 Voltage dips, Short Interruptions Immunity IEC 61000-4-11 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.R 2 of 10 North America only