Click on Series name for product info on aimtec.com Series AMLDV-NZ Up to 700mA LED Driver FEATURES: High Power LED Driver Constant Current Output mode Ultra Wide Input Voltage Range High Efficiency (Up to 96%) Remote ON/OFF Function PWM & Analogue Dimming Function SMD Package Operating Temperature range -40C - +85C Models Single output Maximum Rated Model Input Voltage (V) Output Voltage (V) Efficiency Max (%) Current (mA) AMLDV-4830-NZ 5.5-48 3.3-36 300 96 AMLDV-4835-NZ 5.5-48 3.3-36 350 96 AMLDV-4850-NZ 5.5-48 3.3-36 500 96 AMLDV-4860-NZ 5.5-48 3.3-36 600 96 AMLDV-4870-NZ 5.5-48 3.3-36 700 96 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units Voltage range 24 5.5-48 VDC Absolute Maximum Rating( 10sec) 5-55 VDC ON: Open or 2.8V> V <6V On/Off Control (Analog Control) (Leave open if not used) OFF: V <0.6V Remote pin current V=5V 1 mA Quiescent input current in Vin=24V, V<0.6V 400 A Shutdown mode Dimming Control (Digital Control) Max PWM Frequency: 200Hz Input Voltage Range (Vin=5.5-48V) 0-15V Output Current Range(Vin=5.5-48V) 0-100% Dimming Control (Analog Control) Control Voltage Range(Full ON) 0.2V50mV (Leave open if not used) Control Voltage Range(Full OFF) 4.5V50mV Driving Current(V=5V) 0.6mA(max) Input Filter Capacitor Output Specifications Parameters Conditions Typical Maximum Units Current accuracy 2 3 % Short Circuit protection Continuous, Automatic Recovery Efficiency At full load 96 % Max load capacitance 1000 F Ripple & Noise 20MHz Bandwidth 120 mV p-p o o Temperature coefficient -40 C to+71 C 0.015 %/oC Output Current Stability Vin=48V, Vo=3.3~36V 1 % Internal Power Dissipation Vin=24V,5LEDS 700 mW General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 370 320-420 KHz o 300mA,350mA -40 to +85 C Operating temperature o 500mA,600mA,700mA -40 to+71 C o Storage temperature -55 to +125 C o Max Case temperature 100 C Cooling Free Air Convection Humidity 95 % RH www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.C 1 of 8 North America only Series AMLDV-NZ Up to 700mA LED Driver General Specifications (continued) Parameters Conditions Typical Maximum Units Case material Plastic UL94-VO Potting material Epoxy Resin(Flammability UL94V-0) Weight 6 g Dimensions (L x W x H) 0.939 0.713 0.315 inches 23.86 18.10 8.00 mm o MTBF >2 000 000 hrs (MIL-HDBK-217 F at +25 C) Safety Specifications Parameters Designed to meet: EN 55022, class B, IEC/EN 61000-4-2 (Perf. Criteria B), IEC/EN 61000-4-3 (Perf. Criteria B), Standards IEC/EN 61000-4-4 (Perf. Criteria B), IEC/EN 61000-4-5 (Perf. Criteria B), IEC/EN 61000-4-5 (Perf. Criteria B) Pin Out Specifications Single Pin 1 -V Input DC Supply 7 Remote On/Off PWM Dimming PWM/ON/OFF or not used 8 -V Output LED Cathode connection 9 +V Output LED Anode connection 10 Analogue Dimming Analogue Dimming or not used 16 +V Input + DC Supply Dimensions Top View 23.86 (0.94) 2.54 1.02 (0.10) (0.04) Front View A 16 10 9 0.25 (0.01) 13.70 18.10 (0.54) (0.71) A 1 7 8 0.25 (0.01) Side View 5.00 max 8.00 7.50 (0.32) (0.30) 1.40 0.20 (0.055 0.008) MAX 3.04 (0.12) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.C 2 of 8 North America only