AMSR-7805-NZ Aimtec

Click on Series name for product info on aimtec.com Series AMSR-78-NZ Up to7.5Watt DC-DC Switching Regulator FEATURES: Short Circuit Protection Operating temperature -40C to +85C Thermal Shutdown Very high efficiency up to 96% Non-Isolated Pin compatible to multiple manufacturers Low ripple and noise Regulated Outputs Pin Compatible to LM78xx Models Single output Efficiency Efficiency Input Voltage Output Voltage Output Current Model Vin Min Vin Max (V) (V) max (mA) (%) (%) AMSR-783.3-NZ 4.75-28 3.3 500 91 81 AMSR-7805-NZ 6.5-32 5 500 94 86 AMSR-786.5-NZ 8-32 6.5 500 94 87 AMSR-7809-NZ 11-32 9 500 95 91 AMSR-7812-NZ 15-32 12 500 95 92 AMSR-7815-NZ 18-32 15 500 96 93 Input Specifications Parameters Conditions Typical Maximum Units Voltage range See the table above VDC Filter Capacitor Quiescent current Vin=(LL-HL) at 0% load 7 mA Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 100% load 2 % Short Circuit protection Continuous Short circuit restart Auto recovery o Thermal shutdown Internal IC junction 150 C o Thermal Impedance 85 C/W Line voltage regulation Vin=(LL-HL) at full load 0.2 % Load voltage regulation 10-100% load 0.4 % o Temperature coefficient -40C to +85C ambient 0.02 %/ C Dynamic Load Stability Nominal Input, 25% load 55 - 250 mV step change Dynamic Load Recovery 0.5 - 1 mSec Ripple & Noise 20MHz Bandwidth 20 mV p-p Maximum capacitive load 1000 uF General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 330 KHz o o Operating temperature With derating above 71 C -40 to +85 C o Storage temperature -55 to +125 C o Max Case temperature 100 C Cooling Free air convection Humidity Non condensing 95 % Case material Non-conductive black plastic (UL94V-0 rated) Weight 2 g Dimensions (L x W x H) 0.45 x 0.30 x 0.40 inches 11.60 x 7.50 x 10.20 mm o MTBF >2 000 000 hrs (MIL-HDBK-217F, Ground Benign, t=+25 C) o Soldering Temperature 1.5 mm from case for 10 sec 300 C NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R6.F 1 of 3 North America only Series AMSR-78-NZ Up to7.5Watt DC-DC Switching Regulator Safety Specifications Parameters Agency Approvals CE IEC 60950-1 Pin Out Specifications Dimensions 11.60 7.50 Pin Single (0.45) (0.30) 1 +V Input PRINTED 2 Ground FACE 3 +V Output 2.54 (0.1) 0.50 (0.02) 0.50 (0.02) Dimensions are in mm (inch) Pin Tolerance: 0.16 mm (0,004 inch) Case Tolerance: 0.25 mm (0.01 inch) Derating Free Air Convection C 71 100 80 Safe Operating Area 60 40 20 0 85 100 - 40 - 20 0 20 40 60 80 C Ambient Temperature www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R6.F 2 of 3 North America only Output Power (%) 7.50 (0.30) 0.50 9.70 2.10 (0.02) (0.38) (0.08) 4.00 0.30 (0.16) (0.01) 10.20 (0.40)