Poverterwer 12/24Vdc USB cHARGERS for mobiles and ts ablet the safe 12Vdc and 24Vdc systems tive for on boternaal ard Pwero Up to 2.1A output (single) 3.0A (double - max 1.5A per socket) The widespread use of smartphones and computer tablets has created an increasing need for user accessible, on the move charging systems. The PowerVerter USB Apple and Android auto-detect Chargers can be easily installed onto any vehicle and allow both drivers and Dashboard, slim-line seat back or passengers to readily access power to charge any device connected via a USB lead. underseat pod configurations This type of system has the distinct advantage of largely negating the need for LED output indicator mains electricity on vehicles. The 5Volt DC power is much safer than mains, so CE and E Marked installation is quick and simple. Passengers can access the charging facility directly and power their equipment simply through the USB charging lead which is supplied with all such products. All versions in the range can be connected directly to both 12Vdc and 24Vdc systems without adjustment. The advanced electronic design will also automatically detect if the device is an Apple or Android configuration and alter the charging process accordingly. This ensures that whatever device is connected, be it Apple, Android, iPad, phone or tablet, it will always be charged as fully as time and capacity allow. PowerVerter USB - available in both single and double outputs Protective pod for under seat or retrofit installation. Can be supplied with charger, pod & wiring ready assembled. he t anger CommerCial tionsallatins The PowerVerter USB chargers are Slim line version for where rear space available with either single or double is limited. The PowerVerter USB chargers offer outputs. The USB1 design is ideal for an advanced design that effectively installation in dashboards, facia displays counteracts the voltage drop common or underneath bus seats and is retained when output currents vary as different from behind with the threaded securing devices charge at different rates. ring provided. The USB2 provides the This avoids the common problem same performance but is designed to be of the phone or tablet indicating it stored out of the way with other wiring. is charging when in fact very little The USB3 design offers a slimline current is being supplied. They also alternative and requires only 20mm rear have an exceptionally low quiescent space. This version is ideal for current of less that 2mA meaning that installation into seat backs, armrests or multiple devices can safely be installed wherever space is an issue. Where rear throughout buses and coaches without Retaining plate for when rear access access is limited, a front fixing retaining materially discharging the battery. is limited plate is supplied as an alternative. A They have been designed to meet the protective installation pod is also rigorous standards required for on available. This will accept both single board commercial vehicle applications and double USB chargers and is ideal including BS EN50498 and ISO 7637- for under seat installations on buses and 2 and are both CE and E marked. coaches as well as retrofit applications The casings are made from V0 rated where the vehicle is already in service. (self-extinguishing) high impact polycarbonate and the electronic w arranty assembly is predominantly by computer controlled SMT for maximum reliability. Like all products, the USB chargers are manufactured using rugged All versions have a subtle blue LED light components to provide years of service to highlight their location on the vehicle. in demanding commercial environments. Due to the limitations of public use, the PV USB-2: Charger only, no interface. guarantee on these products is limited For under dash use. to three years.cHoo SE yoUR PowERVER tER USB PRodUct Part Number Description Dimensions (mm) Weight PV-USB1 Single output 12/24-5V USB Charger 2.1A Diameter 36 Hole 30 Depth 55 30g PV-USB1-DUAL Double output 12/24-5V USB Charger 3.0A Diameter 36 Hole 30 Depth 55 40g PV-USB2 Single output charger only 12/24-5V USB 2.1A 85 x 24 x 14mm 30g PV-USB3 Single output slimline 12/24-5V USB Charger 2.1A Diameter 36 Hole 30 Depth 20 55g PV-USB3-DUAL Double output slimline 12/24-5V USB Charger 3.0A Diameter 36 Hole 30 Depth 20 60g PV-USB-POD Mounting pod for USB Chargers Width 60 Height 52 Depth 80 55g PV-USB-H1 Standard 1.2m wiring with inline 2A fuse 1 x Red 1.2m, 1 x Black 1.2m 50g tEHc Anic l Ad t A Input voltage range 9-32Vdc Output voltage 5Vdc +/- 0.1V Output Power 2.1A (single) 3.0A (double - max 1.5A per socket) Application Charges all USB devices including Apple and Android Transient voltage protection Meets ISO7637-2 International standard for 12/24V vehicles Output noise <50mV pk-pk Off load current (quiescent current) <1.7mA Power conversion efficiency 86% Operating temperature -25C to +30C to meet this specification table Storage temperature -25C to +100C Operating humidity 95% max., non-condensing Casework Black polycarbonate body Connections Input: 6.3mm push-in flat blade connectors Output: USB type A single socket/double socket Output indicator Blue LED output indication Mounting method 30mm diameter hole with or without bezel. USB2 for non through fitting applications. Safe area protection: Limited by current sensing circuit Over Current: Limited by temperature sensing circuit Over heat: Limited by sensing circuit Overvoltage and Undervoltage: Limited by sensing circuit Reverse Polarity: Protected by filters and rugged component selection Transients: Internal fuse Catastrophic protection: Approvals 2004/108/EC The general EMC directive Regulation 10 The automotive directive 93/68/EEC The CE marking directive AESP5 Designed to EN50498, ISO 7637-2 Markings CE and E marked IP Rating: IP30