Alpha Wire 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com Customer Specification PART NO. 2138 Construction 1) Conductor a) Material Tinned Copper, per ASTMB-33 and CID-A-A-59551 b) Stranding Solid c) Diameter 0.0063 2) Braid Data a) Nominal ID 11/64 b) AWG of Ends 34 c) Number of Carriers 24 d) Nominal Percent Coverage 90 e) Total Number of Ends 120 f) Approx. Equiv. AWG 14 g) Approx. Ampacity 32Amps h) Federal Spec Number AA59569R34T0171 Applicable Specifications 1) DSCC CID A-A-59569A Environmental 1) EU Directive 2011/65/EU(RoHS2): All materials used in the manufacture of this part meet the requirements of European Directive 2011/65/EU regarding the restriction of use of certain hazardous substances in electrical and electronic equipment. No Exemptions are required for RoHS Compliance on this item. Consult Alpha Wire s web site for RoHS C of C. 2) REACH Regulation (EC 1907/2006):This product does not contain any of the 16 substances listed on the European Union s REACH Substance of Very High Concern (SVHC) candidate list in excess of 0.1% mass of the item. The outer surface materials used in the manufacture of this part meet the 3)California Proposition 65: requirements of California Proposition 65. Other 1) Packaging a) 100 ft. 9x4.5 x 3.5, Continuous b) 500 ft. 12x6 x 3.5, 3 Pieces Max., 50 ft. Min. Length c) 1000 ft. 12x6 x 3.5, 4 Pieces Max., 50 ft. Min Length Spool size may vary slightly www.alphawire.com Alpha Wire 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742) Although Alpha Wire (Alpha) makes every reasonable effort to ensure there accuracy at the time of publication, information and specifications described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not ensure product availability. Alpha provides the information and specifications herein on an AS IS basis, with no representations or warranties, whether express, statutory or implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever, even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. ALPHA WIRE - CONFIDENTIAL AND PROPRIETARYNotice to persons receiving this document and/or technical information. This document is confidential and is the exclusive property of ALPHA WIRE, and is merely on loan and subject to recall by ALPHA WIRE at any time. By taking possession of this document, the recipient acknowledges and agrees that this document cannot be used in any manner adverse to the interests of ALPHA WIRE, and that no portion of this document may be copied or otherwise reproduced without the prior written consent of ALPHA WIRE. In the case of conflicting contractual provisions, this notice shall govern the status of this document. <br /><br />2019 ALPHA WIRE - all rights reserved.