FIT321V1/2 BK016 Alpha

Alpha Wire 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com Customer Specification PART NO. FIT-321V-1/2 Construction 1) Tubing Type Heat Shrinkable Tubing 2) Tubing Material Flexible Cross Linked Polyolefin Thin Wall 3) Minimum Supplied ID(In) 0.472 4) Maximum Recovered ID (In) 0.160 5) Nominal Recovered Wall Thickness(In) 0.033 6) Color(s) BLACK, WHITE Applicable Specifications 125C / 600 V 1) UL Standard 224 RMS VW-1 2) CSA International Standard 198 AMS-DTL-23053/5 Class 1 & 3 3) Other except dimensions Environmental 1) EU Directive 2011/65/EU(RoHS2): All materials used in the manufacture of this part are in compliance with European Directive 2011/65/EU regarding the restriction of use of certain hazardous substances in electrical and electronic equipment. Consult Alpha Wire s web site for RoHS C of C. 2) REACH Regulation (EC 1907/2006): This product does not contain Substances of Very High Concern (SVHC) listed on the European Union s REACH candidate list in excess of 0.1% mass of the item. For up-to-date information, please see Alpha s REACH SVHC Declaration.The outer surface materials used in the manufacture of this part meet the 3) California Proposition 65: requirements of California Proposition 65. Properties Physical & Mechanical Properties 1) Temperature Range -55 to 135C 2) Shrink Ratio Approximately 3:1 3) Full Recovery Temperature 135C 4) Minimum Shrink Temperature 90 C 5) Tensile Strength 1500psi, Min ASTM D638 6) Elongation 200%, Min ASTM D638 7) Low Temperature Flex(-55C) no cracking AMS-DTL-23053 8) Heat Resistance(175C,168hrs) 100% Elongation, Min ASTM D638 9) Heat Shock(250C,4hrs) no cracking AMS-DTL-23053 10) Secant Modulus 2.5x10 4 psi, Min ASTM D882 11) Longitudinal Change +5%/-15% AMS-DTL-23053 12) Specific Gravity 1.35, Max ASTM D792 13) Shelf Life 25 Years 18 to 35C Electrical Properties 1) Dielectric Strength 500 V/mil, Min ASTM D876 2) Volume Resistivity 1x10 14 ohm-cm, Min ASTM D876 Chemical Properties 1) Water Absorption 0.50%, Max ASTM D570 2) Corrosion(175C,16hrs) no corrosion AMS-DTL-23053 3) Fluid Resistance(23C,24 Hrs) 1000 PSI, Min AMS-DTL-23053 4) Fungus Resistance Pass AMS-DTL-23053 5) Halogen Free No 6) Lead Free Yes Other Packaging 150 FT Notes 1) Other colors available upon request for F321V3/8, 1/2, 3/4 and 1 inch sizes.