Alpha Wire 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com Customer Specification PART NO. FIT-CLEAR-1/8 Construction 1) Tubing Type Heat Shrinkable Tubing 2) Tubing Material Irradiated PVDF (Kynar) 3) Minimum Supplied ID(In) 0.125 4) Maximum Recovered ID (In) 0.062 5) Nominal Recovered Wall Thickness(In) 0.010 6) Color(s) CLEAR Applicable Specifications 1) UL Standard 224 150C VW-1 2) Other AMS-DTL-23053/18, Class 1 Flammability - Passes Environmental 1) EU Directive 2011/65/EU(RoHS2): All materials used in the manufacture of this part are in compliance with European Directive 2011/65/EU regarding the restriction of use of certain hazardous substances in electrical and electronic equipment. Consult Alpha Wire s web site for RoHS C of C. 2) REACH Regulation (EC 1907/2006): This product does not contain Substances of Very High Concern (SVHC) listed on the European Union s REACH candidate list in excess of 0.1% mass of the item. For up-to-date information, please see Alpha s REACH SVHC Declaration. 3) California Proposition 65: The outer surface materials used in the manufacture of this part meet therequirements of California Proposition 65. Properties Physical & Mechanical Properties 1) Temperature Range -55 to 175C 2) Shrink Ratio Approximately 2:1 3) Full Recovery Temperature 150 C 4) Tensile Strength 3500psi, Min ASTM D638 5) Elongation 200%, Min ASTM D638 6) Low Temperature Flex(-55C) no cracking AMS-DTL-23053 7) Heat Resistance(250C,168hrs) 100% Elongation, Min ASTM D638 8) Heat Shock(275C,4hrs) no cracking AMS-DTL-23053 9) Secant Modulus 1x10 5 psi, Min ASTM D882 10) Longitudinal Change +/-10% AMS-DTL-23053 11) Specific Gravity 2.00, Max ASTM D792 12) Deformation(125C,1 hr) 50% Max UL 224 13) Shelf Life 5 Years 18 to 35C Electrical Properties 1) Dielectric Strength 400 V/mil, Min ASTM D876 2) Volume Resistivity 1x10 11 ohm-cm, Min ASTM D876 Chemical Properties 1) Water Absorption 0.50%, Max ASTM D570 2) Copper stability(250C,168hrs) 70% Elongation, Min UL 224 3) Corrosion(250C,16hrs) no corrosion AMS-DTL-23053 4) Fluid Resistance(23C,24 Hrs) 2000 PSI, Min AMS-DTL-23053 5) Fungus Resistance Pass AMS-DTL-23053 6) Vacuum Outgassing - CVCM 0.10%, Max ASTM E595 7) Vacuum Outgassing - TML 1.00%, Max ASTM E595 8) Halogen Free No 9) Lead Free Yes Other Packaging