FITFLEX20 SL008 Alpha

Alpha Wire 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com Customer Specification PART NO. FIT-FLEX-20 Construction 1) Tubing Type Heat Shrinkable Tubing 2) Tubing Material Irradiated Silicone Rubber 3) Minimum Supplied ID(In) 1.142 4) Maximum Recovered ID (In) 0.748 5) Nominal Recovered Wall Thickness(In) 0.079 6) Color(s) SLATE Applicable Specifications 1) UL VW-1 200C / 600 V Standard 224 RMS Environmental 1) EU Directive 2011/65/EU(RoHS2): All materials used in the manufacture of this part are in compliance with European Directive 2011/65/EU regarding the restriction of use of certain hazardous substances in electrical and electronic equipment. Consult Alpha Wire s web site for RoHS C of C. 2) REACH Regulation (EC 1907/2006): This product does not contain Substances of Very High Concern (SVHC) listed on the European Union s REACH candidate list in excess of 0.1% mass of the item. For up-to-date information, please see Alpha s REACH SVHC Declaration. The outer surface materials used in the manufacture of this part meet the 3) California Proposition 65: requirements of California Proposition 65. Properties Physical & Mechanical Properties 1) Temperature Range -50 to 200C 2) Shrink Ratio Approximately 1.7:1 3) Full Recovery Temperature 135C 4) Tensile Strength 870psi, Min ASTM D638 5) Elongation 350%, Min ASTM D638 6) Longitudinal Change -15% AMS-DTL-23053 7) Specific Gravity 1.20, Max ASTM D792 8) Shelf Life 5 Years 18 to 35C Electrical Properties 1) Dielectric Strength 200 V/mil, Min ASTM D876 2) Volume Resistivity 1x10 12 ohm-cm, Min ASTM D876 3) Dielectric Constant 3.2 IEC 250 Chemical Properties 1) Water Absorption 1.00%, Max ASTM D570 2) Fungus Resistance Pass AMS-DTL-23053 3) Halogen Free No 4) Lead Free Yes Other Packaging www.alphawire.com Alpha Wire 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742) Although Alpha Wire (Alpha) makes every reasonable effort to ensure there accuracy at the time of publication, information and specifications described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not ensure product availability.