Alpha Wire 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com Customer Specification PART NO. VF16010 Construction Diameters (In) 1) Component 1 4 X 1 COND a) Conductor 10 (105/30) AWG TC 0.120 b) Insulation 0.047 Wall, Nom. XLPE 0.219 (1) Separator Paper Tape, 10% Overlap, Min. (2) Color(s) Cond Color Cond Color Cond Color 1 BLACK 1 3 BLACK 3 GREEN OR 2 BLACK 2 4 GREEN/YELLOW 2) Cable Assembly 4 Components Cabled a) Twists: 1.5 Twists/foot (min) 3) Shield: A/P/A Tape, 25% Overlap, Min. a) Drain Wire 10 (105/30) AWG TC b) Braid TC,85% Coverage, Min. 4) Jacket 0.085 Wall, Nom.,TPE 0.750+/- 0.023 a) Color(s) BLACK b) Jacket Separator Tissue Tape, 25% Overlap, Min. ALPHA WIRE-L VF16010 VFD CABLE 4C10 SHIELDED (UL) 1000V FLEXIBLE MOTOR SUPPLY CABLE 600V TYPE TC-ER -40C RHW-2 CDRS XLPE/TPE 90C DRY/WET SUN RES OIL I/II OR 10 AWG C(UL) CIC CONTROL/TC -40C c) Print SUN RES 90C WET/DRY XLPE INS FT4 CE ROHS (DATE CODE) (SEQ FOOTAGE) Note: Product may have c(UL) or CSA markings depending upon plant of manufacture. Applicable Specifications 1) UL 90C Dry / 90C Wet / 600 V a) Component 1 RHW-2Wet/Dry RMS 90C Dry / 90C Wet / 600 V XHHW-2Wet/Dry RMS 90C / 600 V b) Overall TC RMS EXPOSED RUN SUN RES 1000V Flexible Motor Supply Cable OIL RES I/II 2) CSA International C(UL) -40C C(UL) CIC CONTROL C(UL) TC C(UL) FT4 3) CE: EU Low Voltage Directive 2006/95/EC Environmental 1) EU Directive 2002/95/EC(RoHS): All materials used in the manufacture of this part are in compliance with EU Directive 2002/95/EU regarding the restriction of use of certain hazardous substances in electrical and electronic equipment. Consult Alpha Wire s web site for compliance Date of Manufacture. 2) REACH Regulation (EC 1907/2006): This product does not contain Substances of Very High Concern (SVHC) listed on the European Union s REACH candidate list in excess of 0.1% mass of the item. For up-to-date information, please see Alpha s REACH SVHC Declaration. The outer surface materials used in the manufacture of this part meet the 3) California Proposition 65: requirements of California Proposition 65. Properties Physical & Mechanical Properties 1) Temperature Range -40 to 90C 2) Bend Radius 10X Cable Diameter 3) Pull Tension 428 Lbs, Maximum