KO4700 The housing shell has molded printed circuit board guides to save time when inserting Series printed circuit boards, prevent misconnections and to keep the boards from moving. Integral tabs on the bottom of the shell further help to hold boards in place, eliminating lateral movement. KO4700 housing shells can be potted. Printed circuit boards can be mounted in three ways: Behind the Front Cover Horizontally Vertically Depending on the enclosure type, one board can be mounted directly behind the front cover (parallel to the DIN rail).Boards can also be mounted horizontally (parallel to the DIN rail) or vertically (perpendicular to the DIN rail). (Refer to the Ordering Pages for board patterns and location of board guides.) Ideal for industrial applications. Small to large in size, KO4700 The housing cover enclosures can accommodate 8 to132 terminals for field wire Housing Shell snaps onto the housing connections. Series KO4700 enclosures can be customized to the PC Board shell. Two keyed tabs exact number of terminals required. Standard enclosures are Wire Jumper lock the cover firmly in equipped with the maximum number of terminal strips and place. Removal of the Terminal terminals.The KO4700 series are available with two types of Cover cover is possible for terminations for connecting external wires. The Pressure Plate service and repair. type terminals,with a center line spacing of 9mm (.35 in.) and the Box Clamp design, which has a 5mm (.19 in.) center line spacing COVER DESIGNS for much higher density. Single piece, tan color covers are typically used with the smaller enclosures. They incorporate terminals and connections to the MATERIALS inside of the enclosure. In some of the smaller enclosures, the Housing cover doubles as a plug. A printed circuit board can be mounted Housing Shell: Polycarbonate, 10% Glass Filled directly behind the front cover. This board is ideal for mounting Cover: Polycarbonate, 10% Glass Filled components used for Cover Panel: Clear Polycarbonate or Glass Filled Polycarbonate setting, adjusting and monitoring such as Terminals switches, potentiometer, Pressure Plate: Zinc Plated, Chromated Steel LEDs and LCDs. There is Terminal Screw: Zinc Plated, Chromated Steel no interferance with any Removable Cover Clamp: Nickel Plated Brass Panel, Clear other boards mounted : Tin Plated Bronze Removable Cover within the enclosure. Panel, Tan Connector Contact: Beryllium Copper, Tin Plated Card Edge (gold plating available) Connectors Modular covers consist of a one-piece tan frame with matching flat front panel. Some Temperature Rating: versions have a front cover panel that is removable and offered in 1 125C (257F), UL94 V-0 matching tan or clear. The front covers can be custom imprinted Housing Shell Color: Black or marking plates can be produced and installed behind the Terminal Cover Color: Tan transparent front cover panel. PROTECTION TERMINAL DESIGNS KO4700 enclosures have an IP20 rating (finger protected) and Select from Pressure Plate or Box Clamp terminals with wire meet VBG4 and other European accident prevention protectors, and fixed or pluggable terminal-to-board connections. requirements. (Please refer to the Ordering Pages). Removable fixed or pluggable terminal strips can be replaced by terminal plugs if not CONSTRUCTION all of the external connections of the standard enclosure are The KO4700 enclosure series consists of a black housing shell needed. The terminal screws used with both the pressure plate and a tan cover with integral terminals and terminal-to-board and box clamp designs can be operated with a flat tip or a 1 or connections. They are supplied unassembled. 1 2 Philips type screwdriver. On request. Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com 12 KO4700 Series Pressure Plate Termination that insert into brass bushings, molded into the housing shell. The Terminal Screw This type of terminal consists of a pluggable versions are ideal whenever quick connections and pressure plate (captive to the terminal replacement of boards and devices is important. They also reduce screw) and the terminal bottom. The the danger of misconnected wires and downtime. Wire Entry pressure plate rises automatically when MOUNTING the screw is loosened. One or two Solder Pin The KO4700 Series enclosures are designed to be mounted on wires, of equal or different sizes up to PC Board standard 35 x 7.5mm DIN rail but will also fit on the 35 x15mm DIN 2 2.5mm (14 AWG) can be terminated. rail. The extra high enclosures should be mounted on the deeper, The grooved corners of the pressure plate ensure positive 35 x 15mm DIN rail. (Refer to the Ordering Pages on the following retention of wire(s). The flat bottom of the terminal extends to the pages to determine the correct size rail for the enclosure you inside of the enclosure and connects the terminal to the board(s) select.) inside. KO4700 series enclosures can also be panel mounted using pull- Box Clamp Termination 2 out tabs on the base of the The box clamp terminal accepts wires up to 4mm (12 AWG). enclosure. One tab is factory When the terminal screw is tightened, the serrated bottom of the installed on each enclosure. wire protector pushes the wire to be terminated against the Up to a total of 6 pull-out TS35 x 7.5 serrated busbar. The busbar extends to the inside of the enclosure TS35 x 15 mounting tabs can be to provide the terminal-to-board connection. installed (See Accessories) TERMINAL-TO-BOARD CONNECTIONS (Refer to page 49 for mounting instructions.) The KO4700 Series offers fixed and pluggable terminal-to-board connection possibilities. (Please refer to the Ordering Pages on the MARKING following pages for your selection.) KO4700 enclosures have a flat center area on the cover for marking and mounting of components. Several types have Fixed Connections removable front cover panels, which can be marked at a separate Fixed terminal-to-board connections can be made by Wire location. Imprinted marking plates can be used in conjunction with Jumper, Fast On tabs, Solder tabs, or Machine Solderable Pins. the transparent, removable cover panel. Fast On tabs, 2.8mm (.11in.) accept industry standard Fast On ACCESSORIES connectors. Use Housing Shell Terminal Cover Strips with wire jumpers to PC Board Pull-Out Panel Mounting Tabs connect to board(s). Terminal Carrier Screws for Mounting Printed Circuit Board Dummy Insert PC Board Wire Jumper 35 x 7.5mm DIN Rail Terminal Cover connections can 35 x 15mm DIN Rail Cover Frame also be made by Marking Plate Front Panel Cover CUSTOMIZATION soldering a wire Enclosures can be customized to the exact number of terminals jumper between the needed. We can punch, drill or cut custom cutouts and holes for center hole of the potentiometers, switches, LEDs or LDCs. Custom colors and Fast On tab and the printed circuit board(s). special markings are also available. Please call us for further Solder Tab can be hand soldered to the board. information. Machine Solderable Pins can be machine soldered to the board in the same step as the other components, saving assembly time. The metal parts of the terminals are supplied as separate strips which snap into the terminal housing after soldering. Pluggable Connections The pluggable terminal strips of the KO4700 series fit across the width of the enclosure and plug directly into the board(s) by using a Card Edge connector. Enclosures equipped with pressure plate terminals also provide Solder Tabs for terminal-to-board connections when mounting an additional board directly behind the front cover. A Wire Jumper can be soldered to these tabs as well. For better retention, the strips have captive screws at each end Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com 13 7.5mm (.29 in.) 15mm (.59 in.)