BRS5 Altech

Power Feed Block Miscellaneous Accessories UL508 listed End Caps E205412 Type/Cat. No. P95UB Electrical Ratings 200A/ 480VAC 2 Terminal Site Acceptability 1-4/0 AWG (50-120mm ) Recommended/ 19.5Nm (175lb. in.) Required Torque Type/Cat. No: 18/25CAP3P 2 Material of Lug/ Terminal Brass For use with: 18/25mm 2&3 phase Busbar Insulation Material Polyamid 2 For use with UL1077/508 18 and 25mm 3 phase busbars Insulation Caps (standard spacing only) Dimensions DIN Rail Clip Type/Cat. No: BRS5 (5 per strip) 31.6 mm 31.6 mm 2 For use with: 18/25mm 1-3 phase Busbar (1.24 in.) (1.24 in.) 35.6 mm 35.6 mm 63 mm B (1.40 in.) (1.40 in.) (2.48 in.) A B A NOTE: The Power Feed Block uses the space of 5 Pins 88.5 mm of the standard spacing Busbar (see drawing below). (3.48 in.) Phase 1 connects to Pin 1, Phase 2 to Pin 3 and Phase 3 to Pin 5. Pin 2 and 4 are not in use. Pin 6 should be Assembly Instructions covered with an insulation cap if phase sequence stays the same. Therefore, the Power Feed Block covers 6 pins to connect to the three phases. 132 132 Phase 132 465 Pin Phase 1 Phase 2 Phase 3 Altech Corp. t 908-806-9400 f 908-806-9490 www.altechcorp.com 13 43.5 mm (1.71 in.) 63 mm (2.48 in.) Altech UL508 Altech UL1077X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Circuit Breaker Accessories category: Click to view products by Altech manufacturer: Other Similar products are found below : CSC-403PS 8T1-D-11A B151-7184-L NEB10 8C1-C-721 8T1-E-115 8T1-E-275 8T1-E-278 506-11315-001 3803221 X10506BF NES 9- 1393249-0 802-ESB50UL489 XFPB-4 30.329 X22261102 CX2.5/4/O Y30019003 PS-1006 618.6335.069 BAC03 JX2.5/4 JX2.5/6 JX2.5/5 HSP6/10U DMRBU BLACK BOX DB16/BU CM2.5S2 932146100 930120000 601.1231.909 3PRG1 3PLBR4LU 351.5900.149 311.2850.340 2624.0 17BSSV 1-1423696-8 LS3-WH BAC12 Y30028402 30.617 8T1-E-114 SF06-5,08 2LP199 ZG20-2 3PSML401 3PSML402 2LP219