CTS50/70NA Altech

Feed-Through DIN RAIL AND PANEL MOUNTABLE CTS35UN CTS50/70N CTS50/70NA CTS95U/120N NEWNEW NEWNEW NEWNEW with with Terminal Width 16 mm 20.5 mm 20.5 mm 25 mm Allen Screw Allen Screw Height x Length 58 x 50.5 mm 75.5 x 71 mm 75.5 x 71 mm 90 x 83 mm Stripping Length 15 mm 22 mm 24 mm 24 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps & 1 tapped hole for cross 2 screw clamp connections 2 screw clamp connections 2 screw clamp connections Approvals 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 Wire Range 12-2 AWG 4-35 sq.mm 12-2 AWG 2-250 KCMIL 25-120 sq.mm 2-250 KCMIL 8-2/0 AWG 10-70 sq.mm 8-2/0 AWG 8-2/0 AWG 10-70 sq.mm 8-2/0 AWG Voltage Rating 600 V 1000 V 600 V 1000V 1000 V 1000 V 1000V 1000 V 1000 V 1000V 1000 V 1000 V Current Rating 130 A 125 A 130 A 240 A 269 A 240 A 175 A 192 A 175 A 175 A 192 A 175 A Torque 25 lb-in 2.5 Nm 25 lb-in 90 lb-in 6 Nm 90 lb-in 38 lb-in 3 Nm 38 lb-in 38 lb-in 3 Nm 38 lb-in Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CTS95U/120N 10 CTS35UN 50 CTS50/70N 20 CTS50/70NA 20 Isolation Partition PP35UN 50 DIN Rail for ordering information refer to pages 90-91 End Stop CA702 50 CA202 50 CA202 50 CA202 50 for ordering info. CA802 50 CA102 50 CA102 50 CA102 50 refer to page 92 Internal 2 pole CA771/2 50 Ratings As Per AUX6 Jumper 3 pole CA771/3 25 IEC60947-7-1 CA771/4 25 4 pole Auxiliary Terminal Block Voltage/Current: 1000 V / 41 A CA771/10 10 10 pole Torque: 0.8 Nm Used for: 100 pole IEC 60079-7 CTS50/70N Insulated 2 pole CA781/2 50 Voltage/Current: 630 V / 36 A CTS50/70NA Internal 3 pole CA781/3 25 Torque: 0.8 Nm CTS95/120N Jumper 4 pole CA781/4 25 UL-1059 10 pole CA781/10 10 Wire Range 22-8 AWG Voltage/Current: 600 V / 50 A Torque: 14 lb-in In certain power circuits, CSA22.2-158 Current there is a need to take an 2 pole CA703/10 100 extra connection for an Bars Voltage/Current: 600 V / 50 A 3 pole CA704/10 100 Auxiliary circuit like an indi- 4 pole CA705/10 100 Torque: 14 lb-in cating light or contactor. The 10 pole CA770/10 100 Width x Length x Height AUX6 terminal easily plugs 10 pole (breakable) 8 x 53.6 x 29.4 mm into the terminal and pro- 100 pole Std. Pk.: 10 vides this extra connection point. Marking Tag: MT8 CA629/2 10 CA628/2 10 CA628/2 10 Shorting Link CA629/3 10 CA628/3 10 CA628/3 10 System Shorting Sleeve CA707/S/Q/2 100 & Screw Marking Tags MT16 100 MT16 100 MT16 100 MT16 100 10 Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for DIN Rail Terminal Blocks category: Click to view products by Altech manufacturer: Other Similar products are found below : 1045932 00110420202 00110430402 5724.2/L 592808-3 CTS25U/BL CTS2.5U-N/Y 91.010 91.040 DP25-GY-ND 15288 90.070 90.905 91.001 91.020 91.201 91.340 2713793 2757571 280-331 283-317 283-607 2909044 2909798 29-2052 SRT2-OD08CL-1 CDL4U(E)MOV 2757801 2794660 284-317 2890975 2907033 3048496 CTS2.5U-N/O 5542152 5602077 0709880 5520682 5605444 5607102 EPUSC SRT2-OD16P 2901288 591620-2 1-591651-1 NRA37-1/2 592814-1 592814-3 SRT2-ID16P NRA37-12