W W 5 W / N 3 4 + / / P P 3 P 3 2 PIN & SLEEVEDEVICES Features include: line of industrial plugs and sockets are High impact and abrasion resistance manufactured by ABL Sursum, a company well known in Resistant to oil, petrol, most acids and alkalines Europe for its quality electrical products. This major Operating Temperature range manufacturer combines the elements of good design, high quality, safety, ease of installation and competitive -13F to 176F (-25C to 80C) cost. The pin and sleeve devices are manufactured to EN Excellent anti-tracking 60309 Part 1 and 2: IEC 60309. Their rugged construction Grooved body improves hand grip in polyamide 6 material provides good anti-tracking Insulated cable clamp device properties and high resistance to aggressive industrial Maximum wiring space use. Terminals clearly marked All screws are accessible from one side In accordance with the Standard s requirements, these devices are color coded to provide positive voltage and frequency matching and external key-ways ensure correct alignment of contact pins. The position of the ground pin relative to the socket s key-way are designated as a clock FEATURE hour position. 20-30A The ground terminal also has a larger diameter than the plugs, connectors, contacts, making it impossible to install it in an IEC 60309 and angled inlets device with a different voltage rating. Assembly is simple and quick with the help of the multi- The shrouded housing made of high impact nylon material ramp locking system. Parts are delivered in a half unlocked protects the contacts from physical abuse and safeguards stage to make initial assembly straightforward. against touching live parts when partially engaged. All terminals are clearly marked in both IEC 60309 and 1. Match triangle icons for both housings in open position. North American Standards. 2. Twist counter-clockwise until locked as per above figure. Voltage Configuration Chart COLORCODINGAND GROUNDPINPOSITIONS Pin and Sleeve devices are color coded to provide 120/250V AC positive voltage and frequency matching and external key- ways ensure correct alignment of contact pins. The position of the ground pin relative to the socket s key-way are designated as a clock hour position. The ground terminal also has a larger diameter than the contacts, making it impossible to install in an IEC 60309 12 11 1 device with a different voltage rating. 10 2 9 3 208Y/120V 250V AC 380V AC 8 4 440V AC 120V AC 7 5 6 L1 L2 L3 L2 480V AC 277V AC PE 250V AC L1 N L3 N PE 480V AC 600V AC 400V AC 6h 9h 480Y/277V 600Y/347V Front view of receptacle/connector to contact barrier 346Y/200V AC 415Y/240V AC Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.comTECHNIC ALDATA Electrical Insulation Voltage, Max. (Volts) 16/20 Amp. (A) = 690V (Plugs, Connectors, Receptacles) / 500V (inlets) 60/63 Amp. (A) = 750V 30/32 Amp. (A) = 690V (Plugs, Connectors, Receptacles) / 500V (inlets) 125/100 Amp. (A) = 750V Dielectric Withstanding Voltage 16/20 Amp. (A) = 3,000V (Plugs, Connectors, Receptacles) / 2,500V (inlets) 60/63 Amp. (A) = 2,500 V 30/32 Amp. (A) = 3,000V (Plugs, Connectors, Receptacles) / 2,500V (inlets) 100/125 Amp. (A) = 2,500V Current Interrupting Certified for current interrupting at full rated current Endurance, Connect and IEC: 16 Amp. (A) = 5000 at a power factor of 0.6 63/60 Amp. (A) = 1,000 a p.f. of 0.6 disconnect cycles at full rated 32 Amp. (A) = 1000 at a power factor of 0.6 100/125 Amp. (A) = 1,000 a p.f. of 0.7 current and voltage UL: 20 Amp. (A) = 5000 at a power factor of 0.75-0.80 30 Amp. (A) = 1000 at a power factor of 0.75-0.80 Environmental Temperature Range, Operating -25C to + 80C (-13F to + 176F) Temperature Resistance Up to 1 hour +100C (167F) Moisture Resistance Splashproof IP 44 Watertight IP 67 Per IEC 60309-1, Clause 18 Flammability per IEC 60309-1 / Clause 27 Flame Class Rating UL 94 or CSA C22.2 No. 0.17: V-2 Material 20 - 30 Amp 60 - 100 Amp Housing (Front and Back) Polyamide 6 Polyamide 6 Cover Polyamide 6 Polyamide 6 Cover Rivet Splashproof IP44: Polyamide 6 Brass Watertight IP67: Brass Cover Spring Spring Steel Stainless Steel (A2) Contact Carrier Polyamide 6 Polyamide 6 Contacts Brass or Nickel-plated Brass Brass Terminal Screws Steel, Brass or Nickel Plated Brass Steel, Nickel Plated, Bichromated Cord Clamp / Bushing Polypropylene and Thermoplastic Elastomer Concentric Laminated Rubber Gland Nut Polyamide 6 Polyamide 6 Assembly Screws Steel Steel, Nickel Plated, Chromated Internal Strain Relief NA Polyamide 6 Retaining Ring NA Steel, Electro Zinc Plated Recommended Wire Size* UL/CSA Amp Rating Wire Size / UL (min.) Wire Size / CSA (min.) 20 12 AWG 14 AWG 30 10 AWG 12 AWG 60 4 AWG 4 AWG 100 2 AWG 2 AWG IEC Flexible Wire per IEC Solid Wire per IEC Amp Rating Plugs, Connectors, Receptacles, Inlets Receptacles, Inlets 2 2 2 2 16 1mm - 2.5mm 1mm - 4mm 2 2 2 2 32 2.5mm - 6mm 2.5mm - 10mm 2 2 63 min. 10mm min. 10mm 2 2 125 min. 35mm min. 35mm Recommended Screw Torque for Terminal Set Screws Altech Corporation Amp Rating Terminal Screws lb.in. Housing Screws lb.in. 35 Royal Road 16A/20A Receptacles, Inlets 8.85 9.74 Flemington, NJ08822-6000 32A/30A Receptacles, Inlets 9.74 9.74 Phone (908) 806-9400 Strain Relief lb.in. 16A/20A Plugs, Connectors 8.85 35.4 Fax (908) 806-9490 32A/30A Plugs, Connectors 9.74 44.3 www.altechcorp.com 63/60A 17.7 125/100A 88.5 Altech Corp. 252-052010-3M * Please refer to National Electric Code, to determine wire size for different Amp Ratings. Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com