PS-45 Series Features: Universal AC input / full range Specifications Protections: Short Circuit / Overload / Over Voltage/ Overtemperature Cooling by free air convection DIN rail mountable UL508 approved LED indicator for power on Fix switching frequency at 100kHz 100% full load burn-in test 3 year warranty Cat. No. PS-4505 PS-4512 PS-4515 PS-4524 OUTPUT DC VOLTAGE 5V 12V 15V 24V RATED CURRENT 5A 3.5A 2.8A 2A CURRENT RANGE 0 ~ 5A 0 ~ 3.5A 0 ~ 2.8A 0 ~ 2A RATED POWER 25W 42W 42W 48W RIPPLE & NOISE (max) 100mVp-p 200mVp-p 240mVp-p 480mVp-p Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1F & 47F parallel capacitor VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V VOLTAGE TOLERANCE 2.0% 1.0% 1.0% 1.0% Tolerance: includes set up tolerance, line regulation and load regulation. LINE REGULATION 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 800ms, 60ms / 230VAC at full load INPUT HOLD UP TIME (Typ.) 60ms / 230VAC at full load VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 72% 77% 77% 80% AC CURRENT (max.) 1.5A / 115VAC 0.75A / 230VAC INRUSH CURRENT (Typ.) COLD START 28A / 115VAC 56A / 230VAC LEAKAGE CURRENT 1mA / 240VAC PROTECTION OVERLOAD 105 ~ 160% rated output power Protection type: Constant current limiting recovers automatically after fault condition is removed OVERVOLTAGE 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type: Shut down overvoltage, clamping by zener diode OVERTEMPERATURE Tj 135C typically (U1) detect on heat sink of power transistor ENVIRONMENT Protection type: Shut down overvoltage, re-power on to recover WORKING TEMPERATURE -10 ~ +50C (Refer to output load derating curve) WORKING HUMIDITY 20 ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -20 ~ +85C, 10 ~ 95% RH TEMP. COEFFICIENT 0.03% / C (0 ~ 50C) VIBRATION Component: 10 ~ 500Hz, 2G 10min. / 1cycle, 60 min. each long X,Y, Z axes MOUNTING Compliance to IEC60068-2-6 SAFETY & EMC SAFETY STANDARDS UL508 EN60950-1 compliant WITHSTAND VOLTAGE I/P-O/P: 3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC (25C 70% RH) EMI CONDUCTION & RADIATION Compliance to EN55011 EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 ENV50204 EN55024 EN61000-6-2 heavy industry level criteria A The power supply is considered a component which will installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. OTHERS MTBF 364.6K hrs min. MIL-HDBK-217K (25C) DIMENSION 93x78x67mm (LxWxH) PACKING 0.31Kg 48pcs / 16.1Kg / 1.3CUFT All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25C of ambient temperature For the latest on Altech Power Supply specifications please visit www.altechcorp.com/power. 80Mechanical Specification 78 67 8.5 7.5 29 Terminal Pin. No Assignment Pin Assignment Pin Assignment 1 AC/L 6,7 DC OUTPUT+V 2 AC/N 8 LED 3 FG 9 +V ADJ. 4,5 DC OUTPUT-V Block Diagram RECTIFIERS POWER RECTIFIERS +V EMI I/P & SWITCH- & FILTER -V FILTER ING FILTER PWM DETECTION CONTROL FG CIRCUIT Derating Curve Static Characteristic (24V) Ta=25 32 350 100 28 300 80 24 250 60 20 200 16 150 40 12 100 20 8 50 -10 0 10 20 30 40 50 60 (VERTICAL) 70 80 100 120 140 160 180 200 220 240 260 AMBIENT TEMPERATURE (C) INPUT VOLTAGE (VAC) 60Hz Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937. Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 81 LOAD (%) 93 77 LOAD (%) 1 2 3 4 5 6 7 8 9 OUTPUT RIPPLE (mVp-p)