Features: PSB-360 Series (2 Phase) Multiple overload/ short circuit protection modes Efficiency above 91% Easy parallel connection for more power Specifications Small size DIN rail mountable Cooling by free air convection UL508 (industrial control equipment) approved EN60950-1 Built-in DC OK relay contact 3 year warranty OUTPUT Cat. No. PSB-36024 DC VOLTAGE 24 V RATED CURRENT 14 A CURRENT RANGE Refer to Output derating curve RATED POWER 336 W RIPPLE & NOISE (max) 100 mVp-p Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1F & 47F parallel capacitor. VOLTAGE ADJ. RANGE 22 V ~ 27 V VOLTAGE TOLERANCE -0.03 Tolerance: includes set up tolerance, line regulation and load regulation. START UP WITH STRONG LOAD 50,000 F CURRENT SHORT CIRCUIT Icc 30 A Max 2 sec.: Hiccup mode Permanent: Continuous mode DISSIPATION POWER LOAD mas 28 W LINE REGULATION 0.5% LOAD REGULATION 1% SETUP, RISE TIME 1 sec. (max) Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. HOLD UP TIME (Typ.) Typ. 20 msec INPUT VOLTAGE RANGE 187 ~ 264 V AC / 330 ~ 550V AC by switch FREQUENCY RANGE 47 ~ 63 Hz +-6% EFFICIENCY (Typ.) >91 % AC CURRENT (230 400 500 Vac.) 2.2 ~ 1.4 ~ 1.0 A INRUSH CURRENT (Typ.) < 17 A < 5 msec INTERNAL FUSE T 4 A EXTERNAL FUSE (recommended) 16 A (MCB curve B) LEAKAGE CURRENT < 1.5 mA 500 Vac PROTECTION OVERLOAD In (60C) x 1.5 3 min. Current max. Overload 4Vdc (permanent) Imax=In (60C) x (1.8 ~ 2.2) OVER VOLTAGE 30 ~ 35 Vdc OVER TEMPERATURE Yes. Shuts down output and automatically restarts when the temperature inside goes down SHORT CIRCUIT PROTECTION 1 Hiccup Mode / 2 Fold Back / 3 Restart After Main - Selectable ENVIRONMENT DC OK AKTIV SIGNAL (max.) 20 ~ 30 Vdc WORKING TEMP. -25 up to +70 C (>60derating 2.5% C) HUMIDITY 95 % at 25C, no condensation STORAGE TEMP -40 up to +85 C TEMP. COEFFICIENT 0.03% / C (0 ~ 60 C) VIBRATION In according to IEC60068-2-6 SAFETY & EMC SAFETY STANDARDS UL508 approved, IEC/EN 60950, EN 50178, IEC/EN 60950, EN60950-1, PELV EN 60204-1 WITHSTAND VOLTAGE I/P-O/P: 3k VAC I/P-FG: 1.6k VAC O/P-FG: 500 VAC PROTECTION CLASS IP 20 (EN/IEC 60529) ISOLATION RESISTANCE 100 M (min) 500 Vdc EMI CONDUCTION & RADIATION EN61000-6-4 HARMONIC CURRENT EN61000-3-2 EMS IMMUNITY EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN61000-6-2, EN61000-6-4, The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. OTHERS MTBF IEC 61709 > 500.000 h POLLUTION DEGREE 2 CONNECTION TERMINAL BLOCK 2.5 mm Screw (24 ~ 14 AWG) DIMENSION 72x115x135 mm ( 2.8x4.5x5.3 in ) PACKING 0.65 kg (1.3 lbs) each NOTE All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25C of ambient temperature. For the latest on Altech Power Supply specifications please visit www.altechcorp.com/power. 54Mechanical Specification 133 72 Cat. No.: PSB-36024 TB1 Terminal Pin. No Assignment TB1 Terminal Pin. No Assignment Pin No. Assignment Pin No. Assignment (2 phase) 1 N/L 1,2,3 DC output -V 2 L/L 4,5,6 DC output +V FG 7,8 DC OK relay contacts 3 DC OK Relay Contact Outputs are used for preventive function monitoring of the power supply. An electrically isolated signal contact is available. The signal contact closes when the output power is OK and opens when the output voltage falls below 20Vdc 5%. Output Derating Curve Output Voltage vs. Output Current, typ. Out Voltage 28 24 20 16 12 8 4 0 010 20 30 40 Load (A) Parallel Connection A parallel connection with the same model + power supply can be set up to increase the AC output power. The output has to be adjusted approximately to the same value ( 20mV) while DC + applying a 1-2 A load to all devices before LOAD connecting them in parallel. In PSA-600xx, for + more power, the position of the Easy Parallel AC jumper needs to be changed to enable a parallel connection. In this mode up to 4 power supplies DC can be put together in parallel. Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937. Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 55 118