PSP-240 Series Features: Universal AC input / full range Specifications Built in active PFC function Protections: Short Circuit / Overload / Overvoltage / Over temperature Cooling by free air convection DIN rail mountable UL 508(industrial control equipment)approved LED indicator for power on 100% full load burn-in test Fixed switching frequency at 100KHz 3 year warranty Cat. No. PSP-24024 PSP-24048 OUTPUT DC VOLTAGE 24V 48V RATED CURRENT 10A 5A CURRENT RANGE 0 ~ 10A 0 ~ 5A RATED POWER 240W 240W RIPPLE & NOISE (max) 80mVp-p 150mVp-p Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1F & 47F parallel capacitor. VOLTAGE ADJ. RANGE 24 ~ 28V 48 ~ 53V VOLTAGE TOLERANCE 1.0% 1.0% Tolerance: includes set up tolerance, line regulation and load regulation. LINE REGULATION 0.5% 0.5% LOAD REGULATION 1.0% 1.0% SETUP, RISE TIME 800ms, 40ms / 230VAC 800ms, 40ms / 115VAC at full load HOLD UP TIME (Typ.) 24ms / 230VAC 24ms / 115VAC at full load INPUT VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC Derating may be needed under low input voltages, please check the derating curve for more detail FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.96 / 230VAC 0.99 / 115VAC at full load EFFICIENCY (Typ.) 84% 85% AC CURRENT (max.) 2.8A / 115VAC 1.4A / 230VAC INRUSH CURRENT (Typ.) COLD START 27A / 115VAC 45A / 230VAC LEAKAGE CURRENT 3.5mA / 240VAC PROTECTION OVERLOAD 105 ~ 150% rated output power Protection type: Constant current limiting, recovers automatically after fault condition is removed OVERVOLTAGE 30 ~ 36V 54 ~ 60V Protection type: Shut down overvoltage, re-power on to recover OVERTEMPERATURE 100C 5C (TSW: detect on heat sink of power transistor) Protection type: Shut down overvoltage, recovers automatically after temperature goes down ENVIRONMENT WORKING TEMP. -10 ~ +70C (Refer to output load derating curve) WORKING HUMIDITY 20 ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -20 ~ +85C, 10 ~ 95% RH TEMP. COEFFICIENT 0.03% / C (0 ~ 50C) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes MOUNTING Compliance to IEC60068-2-6 SAFETY & EMC SAFETY STANDARDS UL508 UL60950-1 EN60950-1 compliant WITHSTAND VOLTAGE I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC EMI CONDUCTION & RADIATION Compliance to EN55011 EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 ENV50204 EN55024 EN61000-6-2 (EN50082-2) heavy industry level criteria A The power supply is considered a component which will installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. OTHERS MTBF 289.9K hrs min. MIL-HDBK-217K (25C) DIMENSION 125.5x125.2x100mm (WxHxD) PACKING 1.2Kg 12pcs / 15.5Kg / 1.29CUFT All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25C of ambient temperature. For the latest on Altech Power Supply specifications please visit www.altechcorp.com/power. 96125.2 Mechanical Specification 125.5 100 TB1 LED TB2 3 21 4 3 2 1 Assignment Assignment 1 FG 1,2 2 AC/N 3,4 3 AC/L Block Diagram RECTIFIERS EMI FILTER PFC POWER +V I/P & & CIRCUIT SWITCHING -V RECTIFIERS FILTER CONSTANT CURRENT LIMITING & FG O.L.P. DETECTION PWM & PFC CIRCUIT CONTROL O.V.P. O.T.P. Derating Curve Output Derating VS Input Voltage Ta=25 100 100 230VAC 90 80 80 60 70 110VAC 60 40 50 20 40 -100 10 20 30 40 505560 70 (VERTICAL) 85 100 110 135 155 230 264 230VAC Vin: -- 110VAC Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937. Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 97