PSP-480S Series Features: AC input range selectable by switch Specifications Built-in passive PFC function compliance to EN61000-3-2 High efficiency 89% and low dissipation Protections: Short Circuit / Overload / Overvoltage / Over temperature Cooling by free air convection Built-in constant current limiting circuit DIN rail mountable UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test 3 year warranty Cat. No. PSP-480S24 PSP-480S48 OUTPUT DC VOLTAGE 24V 48V RATED CURRENT 20A 10A CURRENT RANGE 0 ~ 20A 0 ~ 10A RATED POWER 480W 480W RIPPLE & NOISE (max) 120mVp-p 120mVp-p Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1F & 47F parallel capacitor. VOLTAGE ADJ. RANGE 24 ~ 28V 48 ~ 55V VOLTAGE TOLERANCE 1.0% 1.0% Tolerance: includes set up tolerance, line regulation and load regulation. LINE REGULATION 0.5% 0.5% LOAD REGULATION 1.0% 1.0% SETUP, RISE TIME 1200ms, 40ms / 230VAC 1200ms, 40ms / 115VAC at full load HOLD UP TIME (Typ.) 23ms / 230VAC 23ms / 115VAC at full load INPUT VOLTAGE RANGE 90 ~ 132VAC / 180 ~ 264 VAC by switch 254 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.7 / 230VAC only EFFICIENCY (Typ.) 89% AC CURRENT (Typ.) 8A / 115VAC 3.2A / 230VAC INRUSH CURRENT (Typ.) COLD START 27A / 115VAC 45A / 230VAC LEAKAGE CURRENT 3.5mA / 240VAC PROTECTION OVERLOAD 105 ~ 150% rated output power Protection type: Constant current limiting, recovers automatically after fault condition is removed OVERVOLTAGE 30 ~ 36V 59 ~ 66V Protection type: Shut down overvoltage, re-power on to recover OVERTEMPERATURE 100C 5C (TSW: detect on heat sink of power switch) Protection type: Shut down overvoltage, recovers automatically after temperature goes down ENVIRONMENT WORKING TEMP. -20 ~ +70C (Refer to output load derating curve) WORKING HUMIDITY 20 ~ 95% RH non-condensing STORAGE TEMP., HUMIDITY -40 ~ +85C, 10 ~ 95% RH TEMP. COEFFICIENT 0.03% / C (0 ~ 50C) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes MOUNTING Compliance to IEC60068-2-6 SAFETY & EMC SAFETY STANDARDS UL508 UL60950-1 EN60950-1 compliant WITHSTAND VOLTAGE I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC / 25C / 70% RH EMI CONDUCTION & RADIATION Compliance to EN55011 (CISPR11) EN55022 (CISPR22) EN61204-3 Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 ENV50204 EN61204-3 EN61000-6-2 (EN50082-2) heavy industry level criteria A The power supply is considered a component which will installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. OTHERS MTBF 187.9K hrs min. MIL-HDBK-217K (25C) DIMENSION 227x125.2x100mm (WxHxD) PACKING 2.6Kg 6pcs / 16.6Kg / 1.75CUFT All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25C of ambient temperature. For the latest on Altech Power Supply specifications please visit www.altechcorp.com/power. 102Mechanical Specification 100 227 106 230VAC 115VAC TB1 TB2 LED 3 2 1 423 1 TB1 Terminal Pin. No Assignment TB2 Terminal Pin. No Assignment Pin No. Assignment Pin No. Assignment 11AC/L ,2 DC O UTPUT +V 2 AC/N 3,4 DC O UTPUT -V 3 FG Block Diagram 230 115 RECTIFIERS RECTIFIERS EMI PASSIVE POWER +V I/P & & FILTER PFC SWITCHING -V FILTER FILTER DETECTION CIRCUIT FG CURRENT LIMIT O.L.P. PWM CONTROL O.T.P. O.V.P. Derating Curve Output Derating VS Input Voltage 100 100 180 ~ 264VAC 90 90 ~ 132VAC 80 80 70 60 60 40 50 20 40 -20 0 10 20 30 40 50 60 70 (VERTICAL) 90 100 115 132 180 190 230 264 Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937. Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 103 LOAD (%) 125.2 12 56.6 LOAD (%)