Technical Data FREEZER FAULT DETECTION ON ELECTRONICS FREEZER is a rapid cooling agent for locating faults in electronic components and for cooling thermally sensitive parts during soldering or calibration. This product has been formulated without the use of any CFCs or HCFCs. APPLICATIONS Suitable for instant fault finding on electronic equipment, such as printed circuit boards, transistors, resistors, condensers and intermittent dry joint connectors. The product should be sprayed directly onto the suspect component. If fault disappears, this confirms that the component is defective and should be replaced. Other useful applications for Freezer include shrink fitting of metal assemblies and embrittlement of sticky substances (e.g. chewing gum) to facilitate removal. TECHNICAL DATA Appearance : Gas at room temperature. Produces a temporary frosted finish Odour : Slight ethereal odour Specifications/Approvals : British Rail Catalogue No. 7/20505 SG 25C : 1.21 Pressure 25C : 7 Bar Discharge rate : 1.5 g/sec Temperature range : Reduces component temperature to - 50C Solubility : Soluble in some solvents, insoluble in water Flammability : Non-flammable Flashpoint : Not applicable in sealed aerosol Packaging : 400 ml aerosol (12 per carton) STORAGE The product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols O should always be stored below 50 C, away from direct heat and naked flame. HEALTH AND SAFETY Health and Safety sheet available separately. TECHNICAL SERVICE CRC Industries UK Ltd provides a technical support service and maintains a constant programme of research and development. We are able to assist customers by specific product development to meet particular requirements. MISREPRESENTATION ACT 1967 TRADE DESCRIPTIONS ACT 1968 The information given in this publication is based on our experience and reports from customers. There are many factors outside our control and knowledge which affect the use and performance of our products and for which reason no warranty is given, express or implied. Users should make their own tests to determine the applicability of such information or the suitability of any products for their own particular purposes. Statements concerning the use of the products described herein are not to be construed as recommending the infringement of any patent and no liability for infringement arising out of any such use is to be assumed. CRC Industries UK Ltd, Wylds Road, Bridgwater, Somerset, TA6 4DD, UK. Tel: +44 (0) 1278 727200 Fax: +44 (0) 1278 425644 Web: www.ambersil.com E-mail: sales.uk crcind.com