MPC25 Amec Thermasol

THERMAL PHASE CHANGE MPC Series Bridging the gap between a Thermal Paste and Solid filler pad a phase change material is an ideal material. At room temperature it is a solid filler pad but when its transition temperature is reached it softens or melts and behaves more like a paste/grease. There are two types of materials, waxed based type and elastomer type. The wax based material has good wetting characteristics and low viscosity the material is ideal to fill any microscopic surface irregularities resulting in very low thermal resistance. It does not dry out, separate or settle. The wax type is available in two thermal conductivities, 4.0/mk and a high performance type 8.0 W/mk. The el astomer type has good compressibility. Due to the physical characteristics of phase change material it is easier to handle and process than paste/grease and yet still offer good thermal conductivity with low thermal resistance. Can be supplied Die cut to customers specification. Specification MPC25 MPC801 MPC315 Thickness (mm) 0.25 0.20 0.13 Material type Wax Wax Elastomer Thermal Conductivity (W/m.k) 4.0 8.0 5.0 Thermal Resistance 0.155 0.07 0.208 o ( C-cm2/W 31mm sq 40psi) o Transition Temperature ( C) 45 46 45 Continuous Temperature (C) +125 +125 ~+125 Sheet size (mm) 130x310 200x150 465x300 Colour Grey Grey Grey AMEC Thermasol 1-2 Steam Mill Lane, Great Yarmouth, Norfolk, NR31 0HP Telephone: +44(0) 1493 668622 Fax: +44(0) 1493 668623 Email: sales amecthermasol.co.uk Website: www.amecthermasol.co.uk X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for amec thermasol manufacturer: Other Similar products are found below : W8TR500G-2.0 FCTL73-15 FCTS73-10N MPC303025T W8TR500G-0.5GF MHP-2550A-250A MPC101020T FCH30305T MPC151525T MPC202025T