Low Voltage Brushless DC Blowers 5.0 (127mm) BLDC Low-Voltage Blower 12/24 VDC, High Flow System 2.82 INCH .168 71.6 3X x .31/ 7.8 DEEP MM 4.27 2.50 1.50 HOLES EQUALLY SPACED 63.5 .88 3.228 38.1 BOLT CIRCLE 22.4 82.00 DISCHARGE .80 20.3 3.81 96.8 1.27 32.3 1.50 2.06 38.1 52.3 INLET 31.8 OPTIONAL: 1.25 .35 3X BOSSES COVER SHELL 8.9 .21 WITH INLET TUBE 3X EQUALLY SPACED ON A 5.3 3.228 5.00 BOLT CIRCLE. 82.00 127.0 Part/ Model Number Specification Units 150166 119375 119378 119379 Voltage VDC 12 24 24 24 Stages - 1 1 1 1 in. H2O 20.1 24.9 24.9 24.9 Max. Sealed Pressure mbar 50.1 62 62 62 CFM 37.7 44.6 44.6 44.6 Max Open Flow Rate m3/hr 64.1 75.8 75.8 75.8 Speed Control - 0-4V Spd. Cmd. External Potent. Adjust. 0-4V Spd. Cmd. Notes: Temperature: Working Air: 0C to 45C , Ambient Air: 0C to 45C, Storage: -40C to 85C. Customized performance available upon request. Please contact AMETEK Technical & Industrial Products Marketing and Sales Department. When used as a vacuum, the blower performance might be less then shown herein, depending on the operating point. Models 119380 through 119385 can be configured and modified for two (2) plane balance option. Optional - cover shell with air inlet tube. Weight = 1.2 lb / .54 Kg Potentiometer Adjustment (Potent. Adjust.) - The specified supply voltage is applied to power the blower and the speed is set by adjusting a potentiometer on the side of the blower. 0-4V Speed Command (0-4V Spd. Cmd.)- Blower speed is proportional to a 0-4V command signal. Maximum speed is reached at 4V or less depending on the blowers operating point. The speed command pin may be connected to the blowers 12V or 24V pin to ensure full speed. External Control - Designed to operate with an external controller such as AMETEKs model 48133. This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions. AMETEK is not responsible for blowers driven beyond factory specified speed, temperature, pressure, flow or without proper alignment. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department. AMETEK TECHNICAL & INDUSTRIAL PRODUCTS A 11 627 Lake Street, Kent OH 44240 PRECISION MOTION CONTROL USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258 www.ametektip.comLow Voltage Brushless DC Blowers 5.0 (127mm) BLDC Low-Voltage Blower 12/24 VDC, High Flow System Typical Performance 3 Flow (m /hr) Flow (CFM) 3 Data presented represents blower performance at STANDARD AIR DENSITY, .075 lb/ft (29.92 Hg, Sea Level, 68 F) Vacuum performance available upon request. This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions. AMETEK is not responsible for blowers driven beyond factory specified speed, temperature, pressure, flow or without proper alignment. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department. AMETEK TECHNICAL & INDUSTRIAL PRODUCTS A 12 627 Lake Street, Kent OH 44240 PRECISION MOTION CONTROL USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258 www.ametektip.com Speed (RPM) Current (A) Pressure (inch H O) Power Demand 2 (Watts) Pressure (mbar)