ACCU-CURVE Precision Interchangeable Thermistors Extremely Accurate Ametherms Interchangeable ACCU-CURVE NTC thermistors Temperature Sensing provide a high degree of measurement accuracy over the -0C to for Medical, Industrial, +70C temperature range. With a fast response time and long-term Automotive, HVAC, and stability, these cost effective devices are ideal for a wide range of Aerospace Applications applications. Available at - - 800 808 2434 www.ametherm.comPrecision Temperature Measurement & Control Devices NTC THERMISTORS Negative Temperature Coefficient (NTC) thermistors are thermally sensitive semiconductor resistors which ACCU-CURVE exhibit a decrease in resistance as absolute temperature increases. Change in the resistance of the NTC FEATURES thermistor can be brought about either by a change in the ambient temperature or internally by self-heating Wide Ohmic Value Range resulting from current flowing through the device. Most of the practical applications of NTC thermistors are Accurate & Stable based on these material characteristics. D.C. 1mW/C INTERCHANGEABLE THERMISTORS Fast Thermal Response Time Ametherm manufactures precision resistance-temperature matched ACCU-CURVE thermistors. These devices T.C. 10 Sec. in Air offer interchangeability over a broad temperature range and eliminate the need to individually calibrate or Compact Epoxy Package Style + provide circuit compensation for part variability. Accurate temperature measurement to 0.1 C is available High Sensitivity over the 0C to 70C temperature range. Standard ohmic values at 25C range from 2,252 to 100,000 ohms. THERMISTOR TERMINOLOGY FOR TEMPERATURE MEASUREMENT & CONTROL DEVICES D.C. The dissipation constant is the ratio, normally expressed in milliwatts per degree C (mw/C), at a specified ambient temperature, of a change in power dissipated in a thermistor to the resultant change in body temperature. T.C. The thermal time constant is the time required for a thermistor to change 63.2% of the total difference between its initial and final body temperature when subjected to a step function change in temperature under zero-power conditions and is normally expressed in seconds (S). Alpha () or Temperature Coefficient of Resistance The temperature coefficient of resistance is the ratio at a specified temperature, T, of the rate of change of zero-power resistance with temperature to the zero-power resistance of the thermistor. The temperature coefficient is commonly expressed in percent per degree C (%/C). Applications There are numerous ways of measuring temperature electronically. Improvements in thermistor technology, coupled with the introduction of integrated circuitry, have made precision temperature measurement systems very cost effective. Microprocessors, A/D converters, interface electronics and displays are readily available. Circuit designs with built-in thermistor resistance-temperature algorithms have gained wide spread acceptance in precision temperature metrology. ACCU-CURVE style thermistors are used in many applications that require a high degree of accuracy and reliability. Some of the most popular applications of NTC ACCU-CURVE thermistors include: Temperature Measurement & Control Temperature Sensors SELECTION CONSIDERATIONS FOR NTC ACCU-CURVE DEVICES Interchangeable ACCU-CURVE NTC thermistors are usually selected when a high degree of measurement accuracy is required over a wide temperature range. By modifying the Alpha equation, the resistance and temperature tolerances can be calculated for various temperature intervals. Because thermistors are non-linear with respect to their resistance-temperature characteristics, Alpha therefore is non-linear across their resistance- temperature range. As an example, a thermistor material curve with an Alpha of -4.4%/C 25C will have an Alpha of -3.8%/C 50C. For practical applications we recommend that the standardized R/T curves be used. ACCU-CURVE thermistors can dissipate 1mW/C. As a result, the possibility of error induced by excessive current flow, which would defeat the level of accuracy these devices are capable of representing, may exist in some circuits. To prevent this type of error, Ametherm recommends that circuit design engineers select the highest R value their circuit will tolerate for applications > 5 Volts to minimize any self-heating of the thermistor device. Refer to the ACCU-CURVE Specifications table for resistance values and temperature tolerances. Ametherm offers two standard R/T curves, C & W, with temperature coefficients of resistance () of -4.4%/C and -4.7%/C, and Beta () values of 3965K and 4250K. To determine the nominal resistance value of a thermistor at a specified temperature, multiply its resistance at 25C value by the corresponding RT/R25 value for the desired temperature and applicable R-T curve from the ACCU-CURVE. T: 800-808-2434 775-884-2434 (Outside the United States and Canada www.ametherm.com info ametherm.com