Amperite Co. 567 52nd Street P.O. Box 329 West New York, NJ 07093 (800) 752-2329 www.Amperite.com Solving your relay requirements since 1922 C10 Series Solid state analog circuitry TDR Delay on operate timing mode DPDT (2 form C) isolated 10 ampere relay contacts Timing selection: Knob adjustable or Fixed Numerous models timing from 0.1 secs. to 480 secs. UL File E96739 (M) CSA File LR62586-3 Specifications Timing Mode: Delay on operate timing cycle begins upon application of input power. The relay contacts transfer at the end of the delay period and will remain transferred until input voltage is removed. Reset occurs when input voltage is removed. Timing Diagram: Contact Information: Arrangement: 2 form C (DPDT) - Diagram C Contact Material: Silver - Cadmium Oxide Rating (Resistive): 10A 240V AC Resistive 15A 30V DC Resistive 15A 120V AC Resistive 1/3 HP 120V AC 1/2 HP 250V AC Expected Life 25C: 10 Million operations, Mechanical 100,000 operations minimum at rated loads Amperite Co. 567 52nd Street P.O. Box 329 West New York, NJ 07093 (800) 752-2329 www.Amperite.com Solving your relay requirements since 1922 Environmental Information: Temperature Range: Storage: -60C to +105C (-76F to +221F) Operating: -45C to +70C (-49F to +158F) Mechanical Information: Termination: 8 Pin Octal Style Plug or 11-Pin Spade Terminals (Dia. C&D) Enclosure: White plastic case. Knob adjustable models have a dial scale for reference only.L version has a black case. Weight: 4 on (114g) approx. Outline Dimension: Timing Specifications: Timing - Fixed: 0.1 through 480 sees. Timing Ranges: 0.1 - 60, 60 - 120, 120 - 180, 180 - 240, 240 - 300, 300 - 480 secs. Custom timing is available. Timing Adjustment: Knob adjustable potentiometer. Timing Tolerance: Fixed Units: 5%. Adjustable Units: -0 to +25% of maximum specified delay time. Minimum specified value or less at low end. Repeatability: +/-5% Release Time: 60 ms typical, 100 ms maximum Timing Cycle Interrupt Transfer: None Initial Dielectric Strength: Between open contacts: 1000V RMS, Between adjacent contact: 1500V RMS Between contacts & coil: 1500V RMS Input Information: Voltage: AC units- 12V, 24V, and 120V. Other voltages are available. DC units- 12V, 24V, 48V and 110V. Other voltages are available.