NUMBER TYPE GS-12-240 Product Specification TITLE PAGE REVISION 50P CF HEADER & RECEPTACLE CONNECTOR 1 of 7 E AUTHORIZED BY DATE Sterling Lin 05-07-2010 CLASSIFICATION CONFIDENTIAL 1.0 GENERAL This specification defines the performance, tests and quality requirements for the CF Header & Receptacle connector. This document is composed of the following sections. 1. General 2. Scope 3. Applicable Documents 4. Requirements Design and Construction Material Finish 5. Test Methods and Requirements 6. Test Plan 7. Revision Record 2.0 SCOPE This specification is applicable to the termination characteristics of the product of CF family which provide interconnection of computer peripherals. 3.0 APPLICABLE DOCUMENTS 3.1 Military Standards: 3.1.1 MIL-STD-202F: Test methods for electronic and electrical component parts. 3.1.2 MIL-STD-1344A: Test methods for electrical connectors. 3.2 Industry Specification/Other Standards: 3.2.1 UL-94: Tests for flammability of plastic materials. 3.2.2 EIA 364: Electrical connector/socket test procedures including environmental classifications. 3.2.3 CFA: CompactFlash Association Standard. 4.0 REQUIREMENT 4.1 Design and Construction: Connectors shall be of the design construction and physical dimensions specified on the applicable product drawing and shall be capable of meeting the qualification test requirements specified herein. 4.2 Materials 4.2.1 Housing: The insulators shall be rated flame retardant 94V-O in accordance with UL-94. 4.2.2 Terminal: Copper Alloy. 4.2.3 Shell: Stainless Steel. This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 02/12/01 REV.F GS-01-001 PDM: Rev:E Released .STATUS: Printed: Nov 27, 2010NUMBER TYPE GS-12-240 Product Specification TITLE PAGE REVISION 50P CF HEADER & RECEPTACLE CONNECTOR 2 of 7 E AUTHORIZED BY DATE Sterling Lin 05-07-2010 CLASSIFICATION CONFIDENTIAL 4.3 Ratings 4.3.1 Rated Voltage (Max.): 100Vac rms. 4.3.2 Rated Current (Max.): 0.5A per contact. 4.3.3 Ambient/Operating Temperature Range: -40 to +85. 4.3.4 Storage Temperature Range: -40 to +85 (Recommended). 4.4 Finish: The finish for applicable components shall be specified on the applicable product drawing 4.4.1 Contact Area: Gold plating with Nickel under-plated. 4.4.2 Solder Tail Area: Tin/Lead plating or Matte Tin plating with Nickel under-plated. 5.0 TEST METHODS AND REQUIREMENTS: 5.1 Electrical Performance: Item Test Description Test Methods Requirement 5.1.1 LL Contact Resistance EIA 364-23A (or MIL-STD-1344A, 1).Initial: 40 m Maximum. Method 3002.1, Test Condition B) 2).After test: 20 m Maximum change from the initial change. 5.1.2 Insulation Resistance EIA 364-21A (or MIL-STD-202F, 1).Initial: 1000 M Minimum. Method 302, Test Condition B) 2).After test: 100 M Minimum. Applied voltage 500VDC for 1 minute. 5.1.3 Dielectric Withstanding EIA 364-20A (or MIL-STD-202F, 1).No shorting during 1 minute Voltage 500VAC(rms), with 1 mA maximum Method 301, Test Condition B) current leakage. 5.1.4 Temperature Rise EIA 364-70 Method B (or IEC-512- 0.5 Amperes per contact, without exceeding 30 temperature rise PT3) above ambient. This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 02/12/01 REV.F GS-01-001 PDM: Rev:E Released .STATUS: Printed: Nov 27, 2010