TYPE NUMBER PRODUCT SPECIFICATION GS-12-402 TITLE PAGE REVISION EXTERNAL SERIAL ATA PLUS USB 2 IN 1 / COMBO CONNECTOR 1 of 8 B AUTHORIZED BY DATE Sterling Lin 02 June 08 CLASSIFICATION 1.0 OBJECTIVE This specification covers the performance, tests and quality requirements for the External Serial ATA plus USB 2 in 1 /COMBO Connector. 2.0 SCOPE This specification is applicable to the termination characteristics of the External Serial ATA family of products. 3.0 GENERAL The document is composed of the following sections: Paragraph Title 1.0 OBJECTIVE 2.0 SCOPE 3.0 GENERAL 4.0 APPLICABLE DOCUMENTS 5.0 REQUIREMENT 5.1 Qualification 5.2 Material 5.3 Finish 5.4 Design and Construction 6.0 PERFORMANCE REQUIREMENT AND TEST DESCRIPTION 6.1 TEST REQUIREMENT AND PROCEDURES SUMMARY 6.2 QUALIFICATION TESTING MATRIX 6.3 REFERENCE TEMP. PROFILE Copyright 20XX FCI Form E-3334 GS-01-001 Rev D PDM: Rev:B Released .STATUS: Printed: Nov 27, 2010TYPE NUMBER PRODUCT SPECIFICATION GS-12-402 TITLE PAGE REVISION EXTERNAL SERIAL ATA PLUS USB 2 IN 1 / COMBO CONNECTOR 2 of 8 B AUTHORIZED BY DATE Sterling Lin 02 June 08 CLASSIFICATION 4.0 APPLICABLE DOCUMENTS The following documents from a part of this sepecification to the extent specified herein. Unless otherwise specified, the latest edition of the document applies. In the event of conflict between the requirements of this specification and the product drawing , the product drawing shell take precedence In the event of conflict between the requirement of this specification and the reference document, this Specification shall take precedence. 5.0 REQUIREMENT 5.1 Qualification Connector furnished under this specification shell be capable of meeting the qualification test requirement specified herein. Unless otherwise specified, all measurements shall be performed within the following lab condition Temperature: 15 to 35 C Relative Humidity: 20% to 80% Atmospheric Pressure: 650mm to 800mm of Hg (86 ~ 106 Kpa) 5.2 Material 5.2.1 Housings Thermoplastic High Temp., UL94 V-0 5.2.2 Contact Copper Alloy 5.2.3 Shield Copper Alloy 5.3 Finish 5.3.1 Contact Gold plating on contact area, Tin plating on solder tail, Nickel underplating overall. 5.3.2 Shield Nickel under plating overall. 5.4 Design and Construction The design, construction and physical dimensions of product shall be specified on the product drawing. 5.4.1 Standard Data 5.4.1.1 Rated Current USB :1.5A max. per contact ESATA:0.1A max. per contact 5.4.1.2 Rated Voltage USB :30V AC max. ESATA:10V AC max. 5.4.1.3 Temperature Rating -- -40 C to 85 C 5.4.2 Mating The connectors should be capable of mating and unmating manually without the use of special tools. 5.4.3 Workmanship Connector shall be uniform in quality and shall be free from burrs, scratches, cracks, voids, chips, blisters, pin holes, sharp edges , and other defects that will adversely affect products life or serviceability. Copyright 20XX FCI Form E-3334 GS-01-001 Rev D PDM: Rev:B Released .STATUS: Printed: Nov 27, 2010