10093084-2015HFLF Amphenol

CABLE ASSEMBLIES QSFP/QSFP+ COPPER CABLE ASSEMBLIES 40GB/S & 56GB/S & 112GB/S aggregate bandwidth applications IEEE802.3 & Infiniband QDR & FDR & EDR (Proposed) OVERVIEW FCIs QSFP (Quad Small Form-factor Pluggable) connector, cage and cable assemblies are designed to meet emerging data center and high performance computing application needs for a high density cabling interconnect system capable of delivering aggregate data bandwidths of 40Gb/s & 56 Gb/s & 112 Gb/s. This interconnect system is fully compliant with existing industry standard specifications such as the QSFP MSA and IBTA (InfiniBand Trade Association). The QSFP cables support the bandwidth transmission requirements as defined by IEEE 802.3ba (40 Gb/s) and IEEE 802.3bj (100 Gb/s) and Infiniband QDR ( 4x10 Gb/s per channel) and FDR ( 4x14 Gb/s per channel) and proposed EDR ( 4x28 Gb/s per channel) specifications. The 38 position SMT mounted edge card connector and the cable assemblys mating printed circuit card has been designed for the higher-bandwidth signal integrity requirements associated with 10Gb/s per channel transmission. The metal EMI cage along with the rugged diecast covers on the cable assembly assure proper EMI shielding effectiveness and termination. FCI offers passive cable assemblies that enable the use of a copper based interconnect system for applications with cable lengths up to 6 meters (10G) and 5 meters (14G) and 5 meters (28G). The cage offering also includes a heat sink and mounting clip to address applications where module heat dissipation is required. FEATURES & BENEFITS TARGET MARKETS/APPLICATIONS Fully compatible with IEEE802.3ba, IEEE802.3bj and Data Infini band QDR & FDR & EDR specifications Servers Networked storage systems 100 differential impedance system Routers Allows for 10Gb/s & 14Gb/s & 28Gb/s per channel trans External storage systems mission aggregate of 40 Gb/s & 56 Gb/s & 112 Gb/s High Performance Computing (HPC) applications total bandwidth Data center networking Optimized PCB interface board to minimize crosstalk and Communications insertion loss Switches Robust diecast covers for superior EMI Routers shielding effectiveness Industry Standards EEPROM for cable signature & system communications InfiniBand Trade Association (IBTA) IEEE802.3ba 30 AWG to 24 AWG cable sizes available IEEE802.3bj RoHS compliant 40 Gigabit Ethernet ( 40G BASE CR4) 100Gigabit Ethernet ( 100G BASE CR4)QSFP/QSFP+ COPPER CABLE ASSEMBLIES CABLE ASSEMBLIES The cable assemblys 38 position printed circuit card has been designed for the higher-bandwidth signal integrity requirements associated with 10Gb/s & 14Gb/s & 28Gb/s per channel transmission. The printed circuit board has also been designed to accommodate the industry (SFF) de- fined EEPROM cable signature requirements. FCI offers Infiniband QDR and FDR and EDR passive cable assemblies. Rugged diecast covers assure proper EMI termination and shielding effectiveness. Cable assembly removal is enabled via a robust user friendly pull tab. In addition, FCI manu- factures these cable assemblies using highly controlled and stable cable assembly manufacturing processes to minimize wire management and termination variations that impact the performance of the cable assembly. Robust final SI based testing and quality systems assure high quality cable assemblies conforming to the high-speed electrical performance requirements in industry specifications. TECHNICAL INFORMATION MATERIALS - CABLE ASSEMBLY Shells: Diecast zinc Copper underplate with a nickel overplate PCB: High performance laminate with gold plated SPECIFICATIONS contact pads Raw cable: 8 individually shielded parallel pair cables GS-12-622 Product specification - QSFP+ connectors, with fully braided EMI shield with low smoke, zero cages & cable assemblies halogen (LSZH) or PVC jacketing APPROVALS AND CERTIFICATIONS EMI girdle: Stainless steel Pull tab: Thermoplastic polymer Infiniband Trade Association (IBTA) Integrators listing Release plate: Stainless steel APPLICABLE INDUSTRY STANDARDS Drive screws: Stainless steel SFF-8436 QSFP+ Copper and Optical Modules ELECTRICAL PERFORMANCE SFF-8074i SFP Small Form-Factor Pluggable Transceiver Differential impedance: 100 Nominal rev 1.0 Within pair skew: <10 ps/meter SFF-8431 Enhanced SFF Pluggable Pair-to-pair skew: <50 ps/meter SFF-8661 QSFP+ 28 Gb/s 4X Pluggable Module (Style A) Withstanding voltage: 300V DC SFF-8662 QSFP+ 28 Gb/s 4X Connector (Style A) Current rating: 0.5A max. per contact IEEE 802.3 Gigabit-Ethernet standard ENVIRONMENTAL PART NUMBERS Operating temperature range: -20C to 85C RoHs compliant Description Part Numbers Thermal shock: EIA 364-32, condition1, 25 cycles, QSFP+ cable assembly passive 10093084 -55C to 85C - 10G compatible Temperature life - EIA 364-17, Method A, Condition 2, Time Condition C, 500 hours, 70C QSFP+ cable assembly passive 10119239 14G compatible Mixed flowing gas EIA 364-65, Class IIA 7 days unmated and 7 days mated QSFP+ cable assembly passive 10121178 28G compatible MECHANICAL PERFORMANCE Durability: 50 cycles CABLE ASSEMBLY CAPABILITY MATRIX Mating force: 40 N max. Refer to QSFP+ cable assembly drawing : Latch strength axial load: 180 N min. 10093084, 10119239, 10121178 Cable axial strain relief: 90 N min. Cable flex: 180 flex 15 cycles per EIA 364-41 Disclaimer For more information, Please note that the above information is subject to change without notice. please contact: Communications fci.com or visit us at www.fci.com