10-101335-328 Amphenol

QWL accessories cabling information Different cable manufacturers use different constructions The Amphenol QWL series of electrical connectors has and cable lays in manufacturing multi-conductor cable. been designed with the problems of multi-conductor The specific cabling manufacturing specification should cable users in mind. Two of these problems, namely be known by the customer in detail in order to properly water proofing and strain relief, are solved by the radial figure each QWL application. This knowledge can save inward compression of an internal neoprene gland in the many individual wire crossovers in any given run of cable. various cable accessories shown on the following pages. Crossovers add materially to the cable diameter without a For additional strain relief beyond that provided by the cable accessory. In those cases where diameter buildup gland, both cable grips and bar clamps are available. is impossible to avoid, special cable accessories with Since the glands close down from .094 to .145 longer barrels are available. (depending on shell size), the optimum condition for cable users is to select a gland with an I.D. only slightly How to order information is covered in detail on pages 4 larger than the maximum O.D. of the cable. The inside and 5. In selecting the base number below, care should diameter of the accessory housing determines the maxi- be used, as some of the cable accessories are provided mum diameter of the cable as shown in the tabulation with protection cap attachment rings, while others are below. Smaller sizes than those shown in each shell size provided with the Kellems strain relief grip as shown. If a can be accommodated by smaller compression glands. type or cable accommodation size is not found herein that fulfills your application, please contact Amphenol, Sidney, NY. All dimensions for reference only. Approx. Work Length (Internal) Shell QWL Connector Minimum Housing Maximum Cable Size Accessory Thd. Short Long Inner Diameter Outer Diameter 10 .500-28 .250 .359 .359 12 .625-24 .375 .484 .484 14 .750-20 .401 .609 .609 16 .875-20 .500 .734 .734 18 1.000-20 1.120 .859 .859 20 1.125-18 1.370 .984 .984 22 1.250-18 1.370 1.109 1.109 24 1.375-18 1.370 1.234 1.234 28 1.625-18 1.370 5.000 1.427 1.427 32 1.875-16 1.370 6.000 1.708 1.708 36 2.062-16 1.370 5.000 1.895 1.895 40 2.312-16 1.370 6.000 2.130 2.130 44 2.625-16 2.375 2.375 48 2.875-16 2.218 6.000 2.630 2.630 41QWL cable accessories 10-101332 10-10133510-101335 Short barrel with grip ShorShort barrel with attact barrel with attachment ringhment ring 10-101333 10-130380 Short barrel without grip Short barrel length with attachment ring & strain relief bars 10-101334 10-113637 Short barrel with grip & attachment ring Long barrel with attachment ring and grip 42