10110818-4005LF Amphenol

INPUT/ OUTPUT CONNECTORS SFP+ CONNECTOR AND CAGE For 10Gigabit-Ethernet (10GbE), 8G Fiber Channel and 10G Fiber Channel over Ethernet applications OVERVIEW Small Form-Factor Pluggable Plus (SFP+) connector and cage I/O offering is designed to support high density cabling interconnect system. It supports data transmission capabilities up to 10Gb/s per channel. The SFP+ board connector features a 20 position and 0.8mm contact centerline spacing. The Surface Mount (SMT) terminated card edge connector comes in tape and reel packaging for automated pick and place assembly. SFP+ cage is designed with metal fingers in each cage port to protect against Electromagnetic Interference (EMI) and improve contact interface to the mating surface when inserted into the chassis opening. The EMI metal cages are available in 1x1, 1x2, 1x3, 1x4 and 1x6 configurations. Light pipe option suitable for LED applications is also available for 1x1 and 1x4 versions. Heat sink option is applicable for all configurations. Fully RoHS compliant, SFP+ connector and cage meets the signal integrity and EMI requirements defined by SFF-8431 specifications. FEATURES BENEFITS Data transmission up to 10Gb/s and backward compatible Supports present data rate bandwidth without system with SFP redesign Mates with SFP+ copper cables, SFP+ active optical cables Optimizes performance to cost or SFP+ optical transceivers Additional compliant pins options available for cages Enables higher extraction forces if soldered Insulation tape option available for cages Eliminates potential short circuits EMI metal fingers are designed for each cage port with Protects from EMI and offers robust connection press-fit termination Heat sink and light pipe options available for cages Provides heat dissipation to cool down devices and visual indication for safe and reliable operation Belly-to-Belly application available for 1x4 cages Increases linear port density SFP+ board connectors available in gold or GXT plating Optimizes performance to costSFP+ CONNECTOR AND CAGE TECHNICAL INFORMATION MATERIALS SPECIFICATIONS Connector Product Housing: High performance resin in black, UL94-V0 Connector: GS-12-1141 Contact: Copper Alloy Cage and Cage Assembly: GS-12-1165 Cage Application Cage: Copper Alloy Connector: GS-20-0385 EMI Metal Fingers: Stainless steel or Copper Alloy Cage and Cage Assembly: GS-20-0384 Light Pipe: Clear polycarbonate Packaging Heat Sink: Aluminium Alloy Connector: GS-14-2372 Heat Sink Clip: Stainless Steel Cage and Cage Assembly: GS-14-2344 ELECTRICAL PERFORMANCES SUPPORTED STANDARDS Low Level Contact Resistance: 10m SFF-8083 SFF-8074i ENVIRONMENTAL SFF-8431 Thermal Shock: EIA364-32 SFF-8432 Cycling Temperature: EIA 364-31 IEEE802.3z High Temperature Life: EIA 364-17 Mixed Flowing Gas corrosion (MFG): EIA 364-65 TARGET MARKETS/APPLICATIONS RoHS Compliant: EU 2002/95/IEC Data Operating Temperature: -40C to +85C Storage System High-end Server MECHANICAL PERFORMANCE Networking Equipment Durability: 250 mating cycles Data Center Networking Fiber Channel and Gigabit Ethernet Servers Mechanical Shock: 50G Communications Random Vibration: 9.26g rms/120 minutes Switch Extraction Force for Cage: 8N min. per pin Router Disclaimer For more information, Please note that the above information is subject to change without notice. please contact: Communications fci.com or visit us at www.fci.com